Table of Contents
Advertisement
Zoom
The Zoom function allows you to enlarge the video image and to pan
through the enlarged image.
Select a (Zoom) in the menu bar.
Press w/v to activate the ZOOM function and select the required zoom
factor: 1.33 or 2 or 4.
The player will go into Pause mode.
The selected zoom factor appears below the Zoom icon in the
menu bar and 'Press ENTER to pan' appears below the menu bar.
The picture will change accordingly.
Press ENTER to confirm the selection.
The panning icons appear on the screen: v w t u and ENTER.
Use the v w t u keys to pan across the screen.
When ENTER is pressed only the zoomed picture will be shown on
the screen.
To exit Zoom mode:
– Press 2.
Playback will resume.
– Press MENU OSD m to clear the OSD display.
FTS-Video
- The FTS-Video function allows you to store your favorite titles and
chapters (DVD) and favorite tracks and indexes (VCD) for a particular
disc in the player memory.
- Each FTS program can contain 20 items (titles, chapters).
- Each time an FTS program is played it will be placed on top of the list.
When the list is full and a new program is added, the last program in
the list will be removed from the list.
- The selections can be called up and played at any time.
Storing a FTS-Video Program
In STOP mode, select Video FTS c in the menu bar.
Press w to open the menu.
The Video FTS menu appears.
Press t or u or FTS to select ON or OFF.
Storing titles/tracks
Press w to select TITLES.
Use u and t to select the required title.
Press ENTER if you wish to store the entire title.
The title number will be added to the list of selections.
Storing chapters/indexes
Press w on the selected title number.
The title number will be marked and the highlight moves to the first
available chapter number for this title.
Use u and t to select the required chapter number.
Press ENTER to confirm the selection.
The title/chapter selection will be added to the list of selections.
Press ENTER or MENU OSD m to exit the Video FTS c menu.
Erasing a FTS-Video Program
In STOP mode, select Video FTS c in the menu bar.
Use w to select PROGRAM.
Use u and t to select the required selection number.
Press ENTER to erase the selection.
Press MENU OSD m to exit.
OPERATION 31
Advertisement
Table of Contents
