English UB-U19 User’s Manual Copyright2003 by Seiko Epson Corporation Printed in China 2003.08 EMC and Safety Standards Applied Product Name: UB-U19 The printers in which this board is installed do not conform to the following: Model Name: M178B Directive 90/384/EEC...
UB-U19 This manual Locking wire strain relief [109104700] Part Name The following view shows the part names of the UB-U19. USB upstream connector USB/serial switching locking wire strain relief serial interface connector...
Page 7
Note: If there is a grounding wire on the interface cable, secure it to the printer using either of the screws used for installing the UB-U19. Connect the other end of the cable to the connector on your computer. Change the printer settings to the serial interface settings. For details, see the settings described in the printer documentation.
Page 8
English Insert the square connector end of the USB cable into the upstream connector of the UB-U19. Insert the opposite end of the USB cable into the downstream connector of the host computer. Change the printer settings to the USB interface (UB-U05) settings. For details, see the settings described in the printer documentation.
Need help?
Do you have a question about the UB-U19 and is the answer not in the manual?
Questions and answers