Advertisement
Competitor Product Comparison
SAFETY PRECAUTIONS:
IMPORTANT: READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN FOR FUTURE REFERENCE.
GENERAL: Upon receipt of the fixture, thoroughly inspect for any freight damage which should be brought to the attention of the delivery carrier.
20, 30W
Front View
INSTALLATION:
Competitor Product Comparison
Junction Box Wiring:
1. Remove the locknut from the bottom of the luminaire and set aside
2. Insert knuckle through 1/2" of junction box
3. Replace locknut on opposite side of junction box and make electrical connections
Conduit:
1. Secure conduit fitting (provided by others) to flood light knuckle
2. Make electrical connections and tighten fitting to conduit
AIMING ADJUSTMENT
Horizontal angle can be adjusted 360° by rotating floodlight luminaire
Vertical angle can be adjusted by changing the knuckle orientation. Loosen the screw through the center of the knuckle, adjust
the angle, tighten the screw once desired angle is achieved. The knuckle can be adjusted 90 ° forward and 90° back for a full
180° adjustment.
CLEANING AND MAINTENANCE
• To maintain the fixture efficacy occasional cleaning of the outer lens surface may be needed.
• Use a mild soap or detergent, which is essentially neutral pH (pH approximately 6 to 8), nonabrasive, and
which contains no chlorinated or aromatic hydrocarbons.
• Wash thoroughly, using a soft cloth.
• Rinse with clean, cold water and wipe dry.
TROUBLE SHOOTING CHECKLIST: If luminaire does not work
– Check your power source.
– Check electrical connections.
E22108
Side View
50W
Front View
Confidential – for internal use only
Side View
Confidential – for internal use only
Locknut
Advertisement
