Alcatel GO FLIP 3 4052Z Quick Start Manual page 7

Charging battery
Insert the small end of the charging cable into the charge port as shown and
connect the charger to a power outlet.
To reduce power consumption and energy waste, disconnect your
charger when the battery is fully charged, and switch off Wi-Fi,
Bluetooth and other wireless connections when they are not in use.
1�2�2 Power on your phone
Press and hold the End/Power Key
your PIN code if necessary. Once unlocked, Home screen is displayed.
If you don't know your PIN code or if you have forgotten it, contact your service
provider. Do not store your PIN code within your phone, instead store your PIN
in a location that is accessible without using phone.
Set up your phone for the first time
The first time you power on the phone, you will be guided through the following
steps:
• Select the phone's language, then press the Right Soft Key
the next step.
Select an enabled Wi-Fi network, then press the Right Soft Key
•
to the next step.
• Learn more about Wi-Fi Calling and then press the Right Soft Key
go to the next step.
Create or sign in KaiOS Account if necessary, then press the Right Soft Key
•
to go to the next step.
Read KaiOS License Terms, then press the Right Soft Key
•
next step.
Even if no SIM card is installed, your phone will still power on and you will be able
to connect to a Wi-Fi network and use some of the phone's features.
until the phone powers on. Type in
5
to go to
to go
to
to go to the