Mercedes-Benz A-Class AMG 2020 Operator's Manual page 30

28 MBUX multimedia system
Storing and calling up measurement values
If measurement is completed or canceled, a
prompt appears asking whether the measure‐
ment should be saved.
Confirm the prompt with ÷ to save.
#
The stored measurements can be displayed via
the History menu item.
Calling up saved measurements
Select ± History.
#
Select Acceleration, Quarter Mile
#
Select the desired measurement.
#
The desired measurement is displayed in
detail.
or
Delete the desired measurement.
#
Calling up the telemetry display
Multimedia system:
TRACK PACE Telemetry
4 5
The telemetry display shows current vehicle data
as a digital value and as a diagram. Up to three
parameters can be selected that are to be
shown in the display.
For example:
Engine speed
R
Wheel angle
R
Speed
R
Steering angle
R
Set the desired parameters.
#
Set the time.
#
or Braking.
The set parameters are evaluated in the dia‐
gram for the time set.
% The time can range from 30 seconds to a
maximum of 20 minutes.
Configuring AMG TRACK PACE
Requirements
To connect a mobile devoice to the TRACK
PACE app:
The TRACK PACE app is installed on the
R
mobile end device.
The mobile end device is connected to the
R
multimedia system via Wi-Fi.
Multimedia system:
TRACK PACE Options
4 5
Connecting a mobile device via the TRACK
PACE app
The TRACK PACE app makes it possible to record
videos and to synchronize them with stored
tracks.
Select TRACK PACE App.
#
Already authorized devices are displayed in
the list.
Select AUTHORIZE NEW DEVICE.
#
Available devices are displayed.
Start the TRACK PACE app on the device to
#
be connected and follow the instructions.
Confirm the authorization prompt.
#
Enter the code displayed on the device.
#
The device is authorized.
or
Select a device that is already authorized.
#
The device is de-authorized.