Do you have a question about the SY-XTR85DJ and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Sytech SY-XTR85DJ
Page 2
Welcome Thank you for purchasing the new “Seismic Beats DJ Mixer Pro” SY-XTR85DJ. Read this manual before using this product and heed the warnings listed below. Keep this manual in a safe place for future reference. Caution Read the following safety procedures before operating the unit.
Page 3
Rear Panel 115V 230V 115V~, 60Hz 230V~, 50Hz 1. POWER Power Switch – Select between: DC INPUT, AC INPUT, or OFF. AC status: The battery will be charging whilst the unit is working. Off Status: The unit will be turned off. DC Status: The unit will work using the battery power.
Page 4
Front Panel 13. ECHO 1. LED DISPLAY Adjust the ECHO depth of the MIC Display System parameter information. Half side 14. GUITAR jack of the display shows information on INPUT-A and the other half of the display shows information on 15.
NORMAL FUNCTION 1. Before you on the unit, connect any wired external music equipment to the speaker. 2. Turn on the power and wait for 3-4 seconds until the speaker functions are connected. 3. Select an audio source by pressing the INPUT-A key. The front panel display will indicate the current mode (AUX-A, BT-A, FM, USB-A).
LED display indicates that the unit is now set to Bluetooth mode. • Search for available Bluetooth devices from your mobile phone or tablet. • Select SY-XTR85DJ from the search results on your phone or tablet. • Select OK or YES to pair this unit with your phone or tablet.
FUNCTION OF USB READER This speaker has two USB ports. Press the INPUT-A key to select USB-A, and insert a USB to playback your music. Press the INPUT-B key to select USB-B, and insert the other USB to play music. Important: The USB port is intended only for data reading only, other devices cannot be used with this USB connection.
Need help?
Do you have a question about the SY-XTR85DJ and is the answer not in the manual?
Questions and answers