Advertisement
Product Setup and Usage
When turned on, press the 'SET' button for 3 seconds to enter settings mode.
•
In this mode, you can set the Year, Month, Date, 12H/24H, Hour, Minute and Alarm.
When editing any of the settings above, simply press the UP or DOWN button until
•
the correct value is showing, then press SET to select the value.
If you set a value incorrectly, you can renew the settings back to their factory default
•
by pressing the RESET button.
When using the 12 hour display format, PM hours are signified by the LED light on
•
the top corner lighting up.
Advertisement
