Advertisement
Kit Contents
Cover Kit:
(1) Front Door
(1) Rear Door
(2) 10-32 Cage Nut
Cover Kit Installation Instructions
Door Attachment: Place the cage nuts provided into the square holes on the
bottom piece of the rack, one on each side. Then simply lower the tabs on the
door into the slots on the top of the rack, and screw the thumbscrew into the cage
nut. Add a lock if desired.
Square hole
for cage nut
Note: Front and Rear doors are reversible if for some reason, you need more door
depth at the front instead of the back.
Doors not shown with full perforation to improve clarity
Page 2
Mobile Kit:
(4) Spring Loaded Handles
(2) Swivel Hard Rubber Casters
(2) Non-Swivel Hard Rubber Casters
(16) 1/4-20 Flat Head Screws
(16) 1/4-20 Nylock Nuts
(16) 10-32 x .500 Pan Head Screws
(16) 10-32 Nylock Nuts
Rear Door (Deeper of the two)
Cage nut
Slot for
optional lock
Front Door
Advertisement
