Meteor Stem Dext 2.0 Series Installation Instructions

Installation Instructions
ADVANCED HIGH CEILING
Dext 2.0 Series - Stem

IMPORTANT SAFETY INFORMATION.

!
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Before wiring to power
supply and during servicing or relamping, turn off power at fuse or circuit breaker. All servicing or relamping
must be performed by qualified service personnel. Product must be grounded to avoid potential electric shock
or other potential hazard. Product must be at locations and at heights and in a manner consistent with its
intended use, and in compliance with Electrical Code and local codes.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
JUNCTION BOX
1
Step 1
Secure half ball with stem.
Step 2
Attach swivel crossbar to junction box (by others).
Step 3
Feed the safety cable and power cord through the stem and
insert half ball joint into slot on swivel crossbar. Align the slot
on ball joint with the tab on the swivel crossbar.
Step 4
Make electric connection in junction box. (See below)
Step 5
Install canopy cover by aligning the tabs on crossbar with
slots in the cover.
METEOR LIGHTING
*METEOR LIGHTING reserves the right to make changes to this product at any time without prior notice and such modification shall be effective immediately.
P: 213.255.2060 F: 213.596.3704
2
www.meteor-lighting.com
4
TAB
CORD
5
3
2019 V1.0 | Page 1 of 3