Precautions for safe use 1. You should read <Precautions for safe use> 2. You should follow <Precautions for safe use> 3. Precautions are classified as follows. Warning When violating the labeling requirement, it may cause serious injury or death. DO NOT PLUG IN NOR UNPLUG WITH WET HANDS. It may cause electric shock or injury.
Page 3
WHEN THE POWER CORD, WIRE WAS BROKEN OR DAMAGED OR THE PLUG-IN PART BECAME LOOSE, DO NOT OPERATE IT. Caution When violating the labeling requirement, it may cause serious injury or damage to the appliance. DO NOT INSERT FINGERS, FOREIGN SUBSTANCES OR OBJECTS SUCH AS PINS INTO GAPS OR HOLES IN THE BODY.
Page 4
Terms of parts / Parts for Processor Locking Clip Main Body Operating Switch Hopper Juice Pusher Pulp Container Container Cleaning Brush Drum Auger Juicing Strainer Drum Adjustable Pressure Cap Round Udon Flat Bread Noodle Noodle Noodle Noodle Food Nozzle Nozzle Nozzle Nozzle Processing...
Page 5
Terms of parts / Parts for Food Processing For Juicing Hopper Adjustable Drum Juicing Auger Drum Pressure Strainer For Food Processing Hopper Round Udon Flat Bread Noodle Noodle Noodle Noodle Nozzle Nozzle Nozzle Nozzle Nozzle Drum Cap Food Auger Drum Processing Strainer | 05...
How to Assembly Use Food processing stem for grinding/noddle making and use Juicing stem for jui Connect drum with main body by turning locking clip clockwise (about 60°). 06 | 4EB010 사용설명서 Oscar DA-1200 (GG Series185x255)_V.00.indd 6 2015-11-18 오전 9:06:16...
Page 7
e Juicing stem for juicing of fruit and vegetable For juicing function Assemble as 1, then assemble auger > strainer > drum cap > Adjustable Pressure Cap . Place the drum cap onto the drum end and turn it counter-clockwise until it clicks firmly into place. Attach adjustable pressure cap to the drum cap end.
Page 8
How to Assembly Use Food processing stem for grinding/noddle making and use Juicing stem for For Food Processor Function Assemble as 1, then assemble auger > food processing strainer > drum cap > nozzle Place the auger into the drum. Insert the processing strainer into the drum.
Page 9
use Juicing stem for juicing of fruit and vegetable Hopper Drum Choosing the Right Strainer by ingredients and Food Ingredients and Food Strainer Fruits like apple, orange, pear, grapes, strawberry, kiwi, etc. Juicing Strainer Vegetables like tomato, avocado, aloe, kale, spinach, carrot, sweet porato, wheatgrass, etc.
Page 10
Making juice of fruit and vegetable Only use Juicing stem Auger-> Juicing stem->Drum cap-> Adjustable pressure cap 1) When assembling Drum cap, turn Drum cap counter-clockwise direction to tighten up on right position 2) Assemble Adjustable pressure cap with Drum cap As for mild and soft fruit like orange and strawberry, turn Adjustable pressure cap to "1"...
Page 11
Put ingredients gradually into hopper chute and press with the pusher. If you put ingredients too much or thick ingredients, the operation may be stopped . Pulp container Juice container Juice outlet 1) Press [ON] button to operate. 2) Wash the ingredients and cut them into proper size to fit into feeding chute 3) Push them down with the pusher provide In case of reversing during operation, press [REV] button short, then press [REV] button for operation.
Page 12
Making Pasta, U-dong, Noodle, Breadstick Assemble auger> food processing strainer >drum cap > nozzle on main body. Place the auger into the drum. Insert the processing strainer into the drum. Place the drum cap onto the drum end and turn it counter-clockwise until it clicks firmly into place.
Page 13
Only use Food processing stem Sprinkle a small amount of wheat flour on the holding dish placed under the spout. Press [ON] button to start making noodles. Push down the dough with the pusher provided. If noodles come out, cut them with scissors to the length size you want. After making the noodles, stop the appliance and then separated the drum and rinse the parts in cold water.
Page 14
Disassemble and cleaning Unplug the appliance before disassemble. (Please do not touch the power code with your wet hands for your safety) Please disassemble the main body and drum set as shown in the picture above. Clean the drum set with a cleaning brush under running water. The assembly is reverse order of disassemble.
Page 15
Please clean the main body with soft material such as a dry towel. (Please do not use hard tool to prevent unexpected damage while cleaning.) | 15 4EB010 사용설명서 Oscar DA-1200 (GG Series185x255)_V.00.indd 15 2015-11-18 오전 9:06:19...
Cautions during operation Use fresh fruits and vegetables for juicing as they contain more juice themselves like kale, wheatgrass, cabbage, etc. Ingredients stored in the refrigerator for a long time should be soaked in cold water for around 10 minutes before use. Pine needles should be soaked in cold water for an hour before use.
Page 17
Please check the details below Before contacting Technical Support for repair. Check the details below before contacting Technical Support for repair or service. When applying for after sales service, check the manufacturer’s serial number or bar code. It makes noise while operating. -While processing hard ingredients, it could make a sound.
Product Specifications Product Name Cord Length Juice extractor 1.4 m Motor Model Name Vidia SJ-002 Single-phase induction motor Fuse Rated Voltage 230 V 250 V 5 A Weight Rated Frequency 50 Hz 6 kg Outward Rated Power 200 W Width...
Page 19
Juicing process steps by ingredients Ingredient Soft Ingredients Hard Ingredients and Leafy greens Tomato Kiwi Grapes Apple Orange(Mandarin) Watermelon Cucmber Carrot Kale Celery Angelica Utilis Makino Cabbage Water parsley Wheatgrass Pine needles This table is recommeneded Juicing process step. Use nozzle by ingrednets and by amount of pulp produce. (ex.
Page 20
Precautions for safe use Terms of parts / Parts for Processor Terms of parts / Parts f How to Assemble Making juice of fruit or Food Processing and vegetable Making Pasta, U-dong, Disassemble and Cautions during Noodle, Breadstick cleaning operation Before contacting Specifications Juicing process steps by...
Need help?
Do you have a question about the SJ-002 and is the answer not in the manual?
Questions and answers