Related Manuals for Topview Outdoor Dome Series
Summary of Contents for Topview Outdoor Dome Series
- Page 1 1MP/3MP/5MP True D/N Industrial Outdoor Network Dome Camera Quick Guide A101DORV / A301DORV A301DORZ / A501DORZ V. 02.24...
-
Page 2: Table Of Contents
Outdoor Dome Series | Quick Guide Table of Content Product Overview Physical Characteristics Installation and Connection Package Content Installation 2.2.1 Checking Appearance 2.2.2 Disassembling the Camera 2.2.3 Connecting the wires 2.2.4 Mounting the camera 2.2.5 Adjusting the camera position 2.2.6 Adjusting Zoom and Focus 2.2.7... - Page 3 Outdoor Dome Series | Quick Guide WARNING This unit operates at AC 24V/ PoE (IEEE 802.3af Class 0). Installation and service should be performed only by qualified and experienced technicians and comply with all local codes and rules to maintain your warranty.
- Page 4 Outdoor Dome Series | Quick Guide FCC Compliance Statement Information to the user: This unit has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 5: Product Overview
Outdoor Dome Series | Quick Guide 1 Product Overview 1.1 Physical Characteristics Unit: ㎜ A101DORV / A301DORV... -
Page 6: Inner Liner
Outdoor Dome Series | Quick Guide A301DORZ / A501DORZ Figure 1 - 1: Physical dimension & Pictorial Index Index # Name Camera bottom case Camera lens base The screws of camera lens base (x3) Tilt adjustment bracket and thumbnuts (x2) - Page 7 Outdoor Dome Series | Quick Guide A101DORV / A301DORV A301DORZ / A501DORZ Figure 1 - 2: I/O Connector 1/2 Index # Name Description To insert a micro SDHC/SDXC card into this slot for recording Micro SD card slot and storage...
- Page 8 Outdoor Dome Series | Quick Guide Reset button Using a paperclip or thin object to reboot the unit. Using a paperclip or thin object to reset all settings of the unit to Default button factory default by pressing for 5 seconds.
-
Page 9: Installation And Connection
Outdoor Dome Series | Quick Guide 2 Installation and Connection Package Content Check everything in the packing box matches to the order form and the packing slip. In addition to this manual, items below are included in the packing box. -
Page 10: Disassembling The Camera
Outdoor Dome Series | Quick Guide 2.2.2 Disassembling the Camera Please refer to the steps with figure below for correct disassembling order. Loosen the 3 camera housing screws (1). Gently set the camera housing (2) aside. Further loosen the 3 camera lens base screws (3). -
Page 11: Mounting The Camera
Outdoor Dome Series | Quick Guide Figure 2 - 2: Rear side for wiring connection 2.2.4 Mounting the camera Step 1. Preparation by Disassembling Remove the camera housing, inner liner and bottom case. ○ ○ Loosen (but not remove) - Page 12 Outdoor Dome Series | Quick Guide If you want to feed wiring from the hole on the top of the bottom case, create a circular opening corresponding to the bottom conduit hole of mounting template) in the mounting surface. If feeding wiring from the side of the bottom case, you don’t need to drill a hole on the mounting surface.
- Page 13 Outdoor Dome Series | Quick Guide Turn the black-colored screws clockwise to extend the locking arms. Tighten the screws sufficiently to compress the locking arms to adjust and fix to the mounting area. Adjust the focusing position by rotating and panning the camera lens base. When rotating the camera lens, do not rotate it over the stop point.
- Page 14 Outdoor Dome Series | Quick Guide Note Please properly lock the screw hole plug on either hole. For example, lock the side conduit hole with the plug while using the bottom conduit hole for cable entry and vice versa.
- Page 15 Outdoor Dome Series | Quick Guide Tie your wiring into a junction box and feed the wiring through the bottom conduit hole on the bottom case. Tighten the screws to secure the bottom case to the junction box. Then connect the wiring.
-
Page 16: Adjusting The Camera Position
Outdoor Dome Series | Quick Guide 2.2.5 Adjusting the camera position The unit has three axes for adjusting field of view on different applications. While screening live view on your monitor, adjust the position by procedures below simultaneously for desired focusing position. -
Page 17: Adjusting Zoom And Focus
Outdoor Dome Series | Quick Guide 2.2.6 Adjusting Zoom and Focus (A101DORV / A301DORV Series Exclusive) Figure 2 - 11: Zoom and Focus Control Loosen the zoom lever / locking screw (D) by turning counter-clockwise. Rotate the zoom ring to adjust the zoom. -
Page 18: Connection
Outdoor Dome Series | Quick Guide 3 Connection Network Topology The unit, which is equipped with Ethernet RJ-45 network interface, can deliver video images and audio in real time via either Internet or Intranet. Please refer to the skeleton drawings shown below for understanding. -
Page 19: Connecting Process
Outdoor Dome Series | Quick Guide Connecting Process 3.3.1 Default IP address Since this is a network-based unit, an IP address must be assigned at the very first. The unit’s default IP address is 192.168.0.30 and sub mask is 255.255.255.0. However, if you have a DHCP server in your network, the unit would obtain an IP address automatically from the DHCP server so that you don’t need to... - Page 20 Outdoor Dome Series | Quick Guide Viewing Preparation Images of the unit can be viewed through various browsers. Before viewing, follow these steps to enable the display. Enable Cookies as instructions below In Internet Explorer, click Internet Options on the Tools menu.
- Page 21 Outdoor Dome Series | Quick Guide Scroll down to the ActiveX controls and plug-ins radio buttons and set as follows: 【Download signed ActiveX controls】 Prompt (recommended) 【Download unsigned ActiveX controls】 Prompt 【Initialize and script ActiveX not marked as safe for scripting】 Prompt Figure 3 - 4: Security Settings 2/4 【Automatic prompting for ActiveX controls】...
- Page 22 Outdoor Dome Series | Quick Guide 【Run ActiveX controls and plug-ins】 Enable 【Script ActiveX controls marked safe for scripting*】 Enable Figure 3 - 6: Security Settings 4/4 Press OK to save the settings. Close all your browser windows and restart a new window. This will allow the new settings taking effect.
-
Page 23: Ip Finder
Outdoor Dome Series | Quick Guide IP Finder IP Finder is a utility program that helps users to locate the unit in local area network that computer is connected to. Please note that IP Finder works only in Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows 7 or above.
Need help?
Do you have a question about the Outdoor Dome Series and is the answer not in the manual?
Questions and answers