JVC AV-30W475/Y Service Manual page 17

4.6.6 SERVICE MODE SETTING
1. V/C, 2. DEF
• Press [CH+] / [CH-] key
For scrolling up/down the adjustment item.
• Press [VOL+] / [VOL-] key
For scrolling up/down the data values.
NOTE:
The setting value will be stored automatically when release
the REMOTE CONTROL UNIT keys.
INPUT
SIGNAL
RF FULL STD
ASPECT
SETTING ITEM
SETTING NO.
(1) INPUT SIGANL
RF : Antenna input
COMP : External (Component) input
EXT : External (S / Composite) input
(2) ASPECT
FULL : FULL screen mode
REGU : REGULAR screen mode
CINE : CINEMA screen mode
PANO : PANORAMA screen mode
(3) VIDEO STATUS
STD : STANDARD
THEA : THEATER
(4) COLOR TEMPERATURE
HIGH : White balance high mode
LOW : White balance low mode
3. SOUND (A)
• Press [CH+] / [CH-] key
For scrolling up/down the adjustment item.
• Press [VOL+] / [VOL-] key
For scrolling up/down the data values.
NOTE:
The setting value will be stored automatically when release
the REMOTE CONTROL UNIT keys.
A01 IN LEVEL
SETTING ITEM
SETTING NO.
1-16 (No.YA095)
LOW
COLOR
TEMPERATURE
VIDEO
STATUS
SETTING VALUE
SETTING VALUE
7. LOW LIGHT
The setting for the WHITE BALANCE (LOW LIGHT) control
circuit.
NOTE:
The setting value will be stored automatically when release
the REMOTE CONTROL UNIT keys.
SETTING
ITEM
BRIGHT
R CUTOFF
SETTING VALUE
8. HIGH LIGHT
The setting for the WHITE BALANCE (HIGH LIGHT) control
circuit.
NOTE:
The setting value will be stored automatically when release
the REMOTE CONTROL UNIT keys.
R DRIVE
SETTING VALUE
9. VCO
The setting for the VCO control circuit.
VCO adjustment status (AFC level)
TOO HIGH
SYNC:
SYNC INPUT
AFC
AFC SW
FINE
SETTING
VALUE
G CUTOFF B CUTOFF
B DRIVE
GOOD TOO LOW
YES
OFF
Setting value
0