Troubleshooting Cefar & Compex IS YOUR CEFAR OR COMPEX DEVICE SHOWING SIGNS OF MALFUNCTIONING? Before contacting our After-Sales Service, we advise you to check the most commonly encountered problems (see reverse). For COMPEX devices, please first check what generation your stimulator is. COMPEX STIMULATORS GENERATION Generation 3 Generation 5 - Fitness - Mi Sport - Energy Mi Ready - Sport 400 - Mi Fitness...
Page 2
MOST COMMON PROBLEMS 1) SCREEN CONTRAST Symptoms - Black screen - Blank screen + message: "Check" appears What to do - Device off - Press and hold down the ON/OFF button for 3 seconds (language menu appears) - For generations 4-5-6: Channel 2, adjust the contrast with + and - - For generation 3: Channel 3, adjust the contrast with + and - Generations Generation 4-5-6...
Page 3
4) CABLES For all generations (3-4-5-6) Symptoms - No stimulus current on the electrode - Signal on screen (cf. photos), alternation of the 2 signals with a beep What to do - Place the electrodes on your skin -> Signal stops due to closed circuit - Check the connections on the electrodes: if you connect the cable to a large electrode, make sure that you do not connect both outputs (pin or snap connectors) to the same electrode - At the point of connection with the device, move the cable (top to...
This manual is also suitable for:
Compex sport 3Compex sport 400Compex top fitnessCompex sport 500Compex mi fitness trainerCompex mi sport...
Show all
Compex energy mi readyCompex mi fitnessCompex bodyCompex fitness iiCompex bodyfitCompex full fitnessCompex vitalityCompex sport eliteCompex performanceCompex runnerCompex fitCompex duofit
Need help?
Do you have a question about the Compex Fitness and is the answer not in the manual?
Questions and answers