Edbak TR51 Installation Manual

Edbak TR51 Installation Manual

Lcd/led trolley 37”-60”

Advertisement

Technical drawing / Rysunek techniczny
703mm
800mm
LCD/LED Trolley 37"-60"/ Wózek do ekranów 37"- 60"
OSTRZEŻENIE:
Przed rozpoczęciem montażu należy uważnie zapoznać się z instrukcją
uchwytu oraz ekranu w celu zapewnienia prawidłowego montażu.
Prace montażowe powinny wykonywać co najmniej dwie osoby posiadające
kwalifikacje w zakresie montażu zgodnie z niniejszą instrukcją.
Firma EDBAK nie bierze odpowiedzialności za straty materialne oraz
uszkodzenia mienia lub ciała, wynikające z nieprawidłowego montażu. Dlatego
należy zawsze przestrzegać:
- w trakcie montażu dokładnie przestrzegać załączonej do produktu instrukcji
montażowej, w przeciwnym razie może to prowadzić do zniszczenia sprzętu,
a nawet uszkodzeń ciała,
- koniecznie przed montażem upewnić się, że pod powierzchnią ściany,
na której będzie mocowany uchwyt nie ma kabli elektrycznych, rur
wodnokanalizacyjnych lub instalacji gazowych,
- w trakcie montażu ekranu do uchwytu upewnić się, że użyte śruby są dobrze
dobrane co do długości i średnicy. W celu idealnego dobrania długości śrub
można skorzystać z dołączonych podkładek plastikowych. Zastosowanie
niewłaściwych śrub grozi trwałym uszkodzeniem sprzętu,
- w miejscach wskazanych w instrukcji, w których są ruchome elementy
uchwytu zachować szczególną ostrożność w celu uniknięcia przyciśnięcia,
dłoni i palców.
Warunki gwarancji wg załączonej do produktu karty gwarancyjnej.
INSTALATION MANUAL
TR51
WARNING:
Please read this manual before the installation to ensure proper assembly.
The assembly should be carried out in accordance with this manual by at least
two persons with proper qualifications in assembly. EDBAK Company shall not
be liable for any material or property damage or bodily injury resulting from
improper assembly. Therefore, you should always follow the instructions:
- during the assembly, please follow the instructions carefully. Otherwise, it
may result in product damage or even personal injury;
- before the assembly you must ensure that under the surface of the wall
where the mount is to be fixed there are no power cables, water or sewage
pipes or gas installations;
- while fixing the screen on the mount, please ensure that the screws are
of proper length and diameter. In order to ensure the right length and
diameter, you may use the accompanying plastic pads. Use of improper
screws may result in permanent product damage. Extra caution should be
given with movable elements in order to prevent crushing or pressing your
hands or fingers. This manual indicates such elements.
The terms of the product guarantee are set forth in the guarantee card.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TR51 and is the answer not in the manual?

Questions and answers

Summary of Contents for Edbak TR51

  • Page 1 The assembly should be carried out in accordance with this manual by at least Prace montażowe powinny wykonywać co najmniej dwie osoby posiadające two persons with proper qualifications in assembly. EDBAK Company shall not kwalifikacje w zakresie montażu zgodnie z niniejszą instrukcją.
  • Page 2 Checklist/Lista elementów 1. Assembling wheels to the base plate Montaż kółek do podstawy TR5 Part list Elementy do montażu TR5 M10x30 M8x30 Ø10 Ø8 LWB / PWB / TWB Z8,2 Allen Key (included) / Klucze załączone w komplecie Allen Key 8 Allen Key 4 A x4 M8x30...
  • Page 3 3. Assembling mounting head on pipe 5. Mounting screen on the VESA adapter Montaż głowicy na rurze Montaż ekranu na adapterze E x4 M8x20 Ø8 B x1 4. Mounting front plates to the back of screen 6 .. Security skrew Montaż...

Table of Contents