Advertisement
Table of Contents
Operating and installation instructions for the
Description:
The WT-250-Wireless-System, is a Made in the U.S.A, wireless data
transmission system for DC-Digital displays.
Power: 100-240Vac to 9VDC @ 1.11A Wall Adapter, 2.1mm coaxial plug with 6ft
cord (user to supply standard outlet).
Frequency: 900Mhz, Frequency hopping, ISM band, Spread spectrum, estimated
indoor range of 1000 feet.
Data connections to computer or DC-GPS-MI: DB-9, RS-232 with 9 of cabling Male
to Female.
Mounting: Wall mount or desk top
Weight: less than 1lbs.
Enclosure transmitter: All aluminum housing 1.0 inches tall x 4.0 inches long x 3.0
inches wide.
Paint: Black textured (finger print resistant) powder coat finish.
WT-250-Wireless-System
1 |
P a g e
Advertisement
Table of Contents
Summary of Contents for DC-Digital WT-250-Wireless-System
- Page 1 Operating and installation instructions for the WT-250-Wireless-System Description: The WT-250-Wireless-System, is a Made in the U.S.A, wireless data transmission system for DC-Digital displays. Power: 100-240Vac to 9VDC @ 1.11A Wall Adapter, 2.1mm coaxial plug with 6ft cord (user to supply standard outlet).
- Page 2 The transmitter should have in clear view or best view of the devices that are reliant upon it for data. In many cases the WT-250-Wireless-System (transmitter) can be set on a desk near the EZ-Time computer or near the DC-GPS-MI. Always test the mounting location site for best and most reliable data transmissions before permanently mounting the transmitter.
Need help?
Do you have a question about the WT-250-Wireless-System and is the answer not in the manual?
Questions and answers