To Set The Alarm - Amplicomms TCL 350 Operating Instructions Manual

To set the alarm

1. Press and hold AL SET/SELECT, the AL indicator
appears and the alarm's hour digits flash. Press L or M
to set the alarm in hours (hold L/M to advance rapidly).
2. Press AL SET/SELECT once again, the alarm's minute
digits flash. Press L or M to set the alarm in minutes
(hold L/M to advance rapidly).
3. Press AL SET/SELECT again, the
and the LCD displays "HI" (vibration at HI level). Press
L or M to select the vibration level.
• HI (strong vibration level)
• LO (soft vibration level)
4. Press AL SET/SELECT once again, the
flashes and the LCD displays "F-1" and flash. Press L
or M to select the alarm tone (frequency).
• F-1 (low tone, 800 Hz)
• F-2 (mid tone, 1 KHz)
• F-3 (high tone, 1.5 KHz)
5. Press AL SET/SELECT once again, the
flashes and the LCD displays "L1". Press L or M to
select the alarm tone volume.
• L1 (soft)
• L2 (medium)
• L3 (loud)
6. Press AL SET/SELECT once again or no button
around 10 seconds to exit the alarm setting mode.
20
Helpline UK 0844 800 6503
(See chapter "Helpline" for costs and hours of operation)
indicator flashes
indicator
indicator