Summary of Contents for Audioprobe Spartan
-
Page 1: Quick Start Guide
ENGLISH Quick Start Guide PRIOR NOTICE •Products features, speci cations, system requirements, and availability are subject to change without prior notice. •Latest information regarding device drivers and others can be found at www.audio-probe.com. -
Page 2: Front View
LED lights up as green (USB Link). The LED turns orange while carrying out communication between SPARTAN A and a computer. Do not unplug the SPARTAN A from the computer while the orange light is on. -
Page 3: Rear View
REAR VIEW 1. Line Output(Balanced) Connect balanced connectors for active speakers and mixers. 2. Instrument Input This Hi-Z input preamp that has been designed especially for connecting a passive pickup system directly. 3. Microphone Input Connect a microphone. When using a condenser microphone, turn on +48V switch to power the microphone. - Page 4 SAMPLE RATE •SET BY HOST APPLICATION If this is checked, Sample Rate of SPARTAN A is set automatically by host applications (e.g. Pro Tools, Cubase, Studio One). Otherwise, Sample Rate may be set manually.
- Page 5 CAPTURE PROBE™ CAPTURE PROBE™ [Windows only] ‘CAPTURE PROBE™’ is a unique tool for capturing internal audio signals without signal loss. By default, only PHYSICAL INPUTs are routed to logical Input of computer. You can nd a detailed knowledge base on our website for practical use of CAPTURE PROBE. •PHYSICAL INPUT CAPTURE You can assign physical signals to logical inputs.
- Page 6 Sound Module MIDI Keyboard Computer Powered Monitors Power Amplifiers Headphones ©2014 AUDIOPROBE Inc. All rights reserved. AUDIOPROBE® and SPARTAN™ are either trademarks or registered trademarks of AUDIOPROBE Inc. All other trademarks contained herein are the property of their respective owners.
- Page 7 INSTALLING SPARTAN A Microsoft Windows 1. Download the latest driver software from www.audio-probe.com. 2. Connect SPARTAN A to your computer via USB cable prior to launching software installation. 3. Wait until Windows reports 'Device driver software was not successfully installed. ' Connect 4.
- Page 8 OS X (10.6.1 or later) natively supports USB Audio Class 2.0 device with very low latency. Connect SPARTAN A to your Mac via USB cable. You can control the SPARTAN A on 'Audio/MIDI Control Panel' on your Mac system. Additional Information and Support We recommend checking AUDIOPROBE website regularly for driver updates and additional information.
Need help?
Do you have a question about the Spartan and is the answer not in the manual?
Questions and answers