Coopers of Stortford 11002 Instructions For Use

Easy Sock Aid
Please read and retain these instructions for future reference

Product description

The Easy Sock Aid is designed to assist individuals who have difficulty bending to put on or take off their
socks. The set consists of the Easy Sock-On Aid which is a U-shaped half cylinder mounted at an angle on a
flat base. The base has a hook for positioning the Sock-On Aid.
To put on your sock, place the Sock-On Aid on your lap or between your thighs, place the toe of the
sock in the middle of the half cylinder pointing down, and roll the upper portion of the sock down
on the outside of the half cylinder. The sock will be inside out down to the foot and open.
Then place the Sock-On Aid on the floor, insert your foot into the sock, and slide the heel down along the
half cylinder to complete putting on the sock.
The Sock-Off Aid consists of a shaft with an end piece that has two prongs with a curved loop in between.
To remove your sock, slide the loop end of the tool between the top of the sock and the ankle and push the
sock down past the heel with the two prongs catching the cuff of the sock. Then let the shaft drop to the
floor and step on it with the other foot.
The foot is removed from the sock, while the sock remains attached to the prongs. Return the Sock-Off Aid
to an upright position and bring the sock within reach. It can be used to remove light compression garments
also.

Easy Sock Aid Key Features:


No bending required for putting on or taking off socks

Easy for one-handed users

Unique cordless system

Compact design for storing
11002
Instructions for Use
v001: 25/10/17