DAILY CLEANING
To wash, always use a non-abrasive sponge and hand wash with warm soapy water. Never use hot/boiling water, or
put any parts in a dishwasher or sterilizer. Dry parts thoroughly; always make sure parts are completely dry before
using again. Must be cleaned daily or after every four bottles when the funnel LED indicator light illuminates.
1
Remove Funnel & Funnel Cover by pulling
out and down.
3
IMPORTANT
IMPORTANT!
Wipe the powder-dispensing hole using a dry
paper towel or soft dry cloth.
Always make sure the Funnel and Funnel Cover are completely DRY before placing in the machine.
Never use a wet or damp cloth to clean the powder dispensing hole or underside of Powder Container.
2
Wash the funnel and funnel cover and
dry thoroughly before replacing.
4
Wipe any spilled powder o base of machine.
9
MONTHLY CLEANING
1
Please watch set-up and cleaning videos at babybrezza.com/video.
2
1
1
Hand-wash powder container and
Wash inside of water tank and wipe
associated parts and dry thoroughly.
outside with clean damp cloth.
Never immerse base of tank in water
or get it wet. It houses electronics that
must remain dry. If the electronics in the
base of water tank get wet, allow to dry
thoroughly for at least 24 hrs before using.
USER TIPS
1
2
Re ll when stirring wheel arms are visible.
Make sure powder is not above the MAX
Never use machine with powder below
line before closing lid.
MIN line.
Use prongs on underside of powder
container lid to gently level the powder.
3
Wipe base with soft, damp cloth or
sponge and dry with a dry paper towel.
3
Wipe any spilled formula o machine
including the side covered by the water
tank. It is very important to keep the
entire Formula Pro® clean.
10
Need help?
Do you have a question about the Formula Pro FRP0045 and is the answer not in the manual?