Download Print this page

Harbor Freight Tools 40107 Operating Instructions

Glider bench, 5 feet wide

Brought to You by Augusta Flint

GLIDER BENCH

(5 Feet Wide)

OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

or any artwork contained herein may be reproduced in any shape or form without the

express written consent of Harbor Freight Tools.

For technical questions please call 1-800-444-3353

Table of Contents

Need help?

Do you have a question about the 40107 and is the answer not in the manual?

Page 1 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com ® Copyright © 2002 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Page 2 Do not use bag in cribs, carriages or playpens. REMOVE ALL PLASTIC FASTENERS AND TAGS that do not belong attached on the unit. They are part of packaging and should be discarded away from small children. SKU 40107 PAGE 2...
Page 3 (#3). Insert the Flat Head Screws (#8) through the Wood Slats (#6) and holes on Seat Tubes (#3). Attach with Small Washers (#14) and Small Nuts (#12). Do not tighten the Small Nuts (#12) at this time. See Figure 2. SKU 40107 PAGE 3...
Page 4 Arms (#4). See Figure 4C. Tighten on other side with Large Nuts (#13) and Large Washers (#15). Tighten all the other nuts and screws to secure the Glider. When finished, turn Glider over. It is now ready to use. SKU 40107 PAGE 4...
Page 5 BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. SKU 40107 PAGE 5...