Advertisement
INSTALLATION
B. Installing The Door/Drawer Panels
• If you are installing accessory kit 3313470.164, proceed with Step 1.
• If you are installing accessory kit 3106863.214B or 3106863.214C, skip to Step 2.
STEP 1
Remove
Adhesive
Backing
Cardboard
Spacer
• Firmly push the cardboard spacer against the refrigera-
tor to attach.
C. Installing The Door And Drawer Side Trim
STEP 1
Panel Insert
• Start by placing the leading edge of the side trim against
the trim on the panel insert and apply inward pressure to
snap the trim into position as required.
Cardboard
Spacer
Centered
On Door
Cardboard
Spacer
Centered
On Drawer
Door Frame
Trim
Top View
STEP 2
Properly
Positioned
Panel
Make sure the panels are positioned behind the top,
bottom, and side trim pieces.
STEP 2
Gently Tap
Trim To Snap
Into Position
2
Door
Drawer
Trim
Trim
Door
Panel
Drawer
Panel
Advertisement
