The Net Return SIMULATOR Series Assembly Manual

SIMULATOR
ASSEMBLY
Thank you for purchasing our product. In this pamphlet you'll
find simple, easy to follow instructions for assembling your new
Net Return Simulator. In about 15 minutes you should have
something that looks like the picture to the right.
So let' s get started.
CONTENTS
• 23 Color-coded aluminum tubes
(1 Tube with sleeved net).
• Simulator Screen
• Left & Right Side Barriers
• Left & Right Side Panels
(not pictured).
• Top-Back Drape
• Front Valance (9")
• Sand Bags (6) -sand not included.
• Duffel Bag
FRAME
2
A) Once the base is complete, locate the 2
upright tubes (with the welds), and connect them
vertically to the frame base. Continue to build up
your frame by connecting the tubes with the
identical colored stripes.
For even easier to follow video instructions on how to assemble or disassemble any
of our products, go on-line to
B) After you connect the tubes with the yellow and
white colored stripes, tip the frame onto its back
(see above) allowing easy assembly of the
upper-most tubes.
TheNetReturn.com/Assembly .
BASE
1
Find the 4 tubes labeled BASE, and connect them to each
other by simply matching the colors stripes together. When you
assemble the base, make sure the label that says "BASE" is
facing up and can be read.
C) Now connect the upper-most tubes, the last of
which will be the one with the sleeved net (red and
black stripes). Then, disconnect the velcro stripes
holding the net.
9