AQUATO PUMP Installation Instructions Manual

With submerged aerator

Hide thumbs

Table Of Contents

Quick Links

Download this manual

Effluent classes

Serial number

Date of commissioning

Tank

(please tick)

Primary volume

SBR volume

Fully biological small wastewater treatment plant

for the treatment of household wastewater in accordance

with DIN 4261/ EN 12566-3

(please tick)

Installation instructions

AQUATO

with submerged aerator

Concrete

PUMP

GRP

Table of Contents

Need help?

Do you have a question about the PUMP and is the answer not in the manual?

Questions and answers

Summary of Contents for AQUATO PUMP

Page 1 Installation instructions AQUATO ® PUMP with submerged aerator Effluent classes (please tick) Serial number Date of commissioning Tank Concrete (please tick) Primary volume SBR volume Fully biological small wastewater treatment plant for the treatment of household wastewater in accordance with DIN 4261/ EN 12566-3...
Page 2 ® Dear AQUATO customer, ® When you put your AQUATO wastewater treatment plant together with a tank of your ® choice, you have to prepare the following documents: • compliance of the tank according to DIN EN 12566-3 (test for water tight ness, durability and stability) •...
Page 3 Marketing Authorisation Holder (MAH) EN 12566-3 Prefabricated sewage treatment plants for to the treatment of domestic wastewater AQUATO PUMP ® ® Concrete / Plastic Efficiency of treatment: Efficiency of the cleaning performance COB: 87,2% (with a certified daily organic pollution load : 92,3% = 0.06 kg / d)
Page 4 Your sticker EN 12566-3 Please attach it clearly visible and durable to the plant, for example, on the control panel.
Page 5 + 49 (0) 5221-10 21 9 - 20 info@aquato.de www.aquato.de We hereby declare that the product AQUATO PUMP ® for small wastewater treatment plants from 4 to 50 PE is according to the following directives: 89/106/EC Building Products Guideline...
Page 6 Further information can be requested from your installation partner or maintenance company. These installation instructions are available for you to download in DIN A4 format as a PDF file on our home page www.aquato.de in the “Downloads” section.
Page 7: Table Of Contents
Table of contents Safety instructions Diagramm of the plant Scope of supply Description of functions Preparation for assembly Installation instructions Declaration of conformity...
Page 8: Safety Instructions
Do not touch anything in the vicinity of the aerator as long as it is connected to the mains. Risk of injury! In cases of repairs, it is only possible to guarantee correct functioning and the preservation of the guarantee if original spare parts or spare parts approved by AQUATO are employed.
Page 9: Diagramm Of The Plant
Diagram of the plant (Example model)
Page 10: Scope Of Supply
Dividing wall bracket made of polyethylene PE / stainless steel support frame Submerged aerator for introduction of air Submerged pump for clear water outflow Submerged pump for filling and surplus sludge flush Filling tube Submerged tube with filling tube and bend for...
Page 11: Description Of Functions
This interrupts the communicating tubes. The surplus sludge is returned by filling pulses of the sludge pump at the beginning of the aeration phase. The duration of the filling pulses is dependent on the values saved in the control.
Page 12: Preparation For Assembly
Preparation for assembly Tank preparation using a 3-chamber tank with two quarter- chambers for the preliminary treatment (sludge storage and buffer) and one half chamber for activation (biology) as an example. - All dimensions must be verified at the installation site. - The accident prevention regulations must be observed.
Page 13: Installation Instructions
Unit for dividing wall installation The dividing wall bracket with carrier tube is infinitely adjustable in the pump carrier with low effort. You can position the required setting dimension exactly (lower seating edge dividing wall bracket to lower edge of pump carrier, see picture). With narrow dividing walls (up to 75mm), take the small contact surface as a base, with wider divi- ding walls (up to 125mm), take the large contact surface as a base.
Page 14 Installation instructions Inserting the AQUATO When assembling on a separating wall (tank with 2 or 3 chambers), the AQUATO is placed on the separating wall. Caution!: The dividing wall edges have to be rounded off. When assembling in a tank without a separating wall, the AQUATO is fastened in the upper part of the tank, e.g., on the cone / flat lid, with screw hooks.
Page 15: Declaration Of Conformity
Declaration of conformity EU – Declaration of conformity ® Manufacturer: AQUATO Umwelttechnologien GmbH Borriesstrasse 10 D - 32051 Herford Germany Tel.: +49 (0 )5221 / 10219 - 0 Fax: +49 (0) 5221 / 10219 - 20 Internet: www.aquato.de E-mail: info@aquato.de We hereby declare that the product ®...
Page 16 Version: 2012-08-09 AQUATO ® Umwelttechnologien GmbH Borriesstraße 10 | D - 32051 Herford | Germany fon + 49 (0) 52 21.10 21 90 | fax + 49 (0) 52 21.10 21 920 www.aquato.de | info@aquato.de installation company:...