PAG 9798 Quick Manual

PAG Ltd.
565 Kingston Road
Raynes Park
London SW20 8SA
IMPORTANT SAFETY INSTRUCTIONS
This leaflet contains important safety and
operating instructions. Read these fully and
note all warnings before using the Power
Supply. Please follow all instructions and
retain this leaflet for future reference.
The Power Supply is not intended for any use
other than the powering of video cameras as
detailed in 'Specification' .
IMPORTANT: This equipment must be
grounded. Do not connect to non-grounded
supplies. Use only on AC supplies 100-250V,
50/60Hz.
Supply connection to the unit should be made
using only the standard lead supplied with
this equipment. Do not defeat the safety
purpose of the grounding-type plug. The
grounding-type plug has two blades and a
third grounding prong. The third prong is
provided for your safety. When the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete
outlet.
Protect the power cord from being walked on
or pinched, particularly at plugs. Unplug this
apparatus during lightning storms or when
unused for long periods of time.
Ensure that the cooling fins are not ob-
structed when in use - e.g. do not cover
them with tape or labels.
T +44 (0) 20 8543 3131
F +44 (0) 20 8540 4116
E sales@paguk.com
www.paguk.com

Power Supply

Model 9798
WARNING: Indoor use only. To reduce the risk
of fire or electric shock, do not expose this
apparatus to rain or moisture.
Do not disassemble the Power Supply.
There are no user-serviceable parts inside.
Incorrect re-assembly may result in a
safety hazard.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as supply cord or plug is damaged, liquid has
been spilled, the apparatus has been exposed
to rain or moisture, does not operate nor-
mally, or has been dropped. In this event you
should seek advice from your nearest PAG
Dealer, or from PAG USA by telephoning 805
520 4911, or direct from PAG Ltd., London,
by telephoning +44 (0)20 8543 3131.
SPECIFICATION
Description: Power Supply Model No. 9798.
Input Supply: 90-139V or 140-270V ~ auto-
selected. Frequency 47-63Hz.
Maximum power consumption 75W.
Output: 13V DC, 50W nominal. The unit is
protected against over-current and short
circuit. The output is protected against over-
temperature and over-voltage by means of
a latching shutdown circuit.