Page 1
LiFT Pack X48 User Guide Part # 990920 v1.3...
Page 2
LiFT Pack X48 User Guide Safety Precautions The Flux Power LiFT Pack is a lithium-ion battery and is classified as Class 9 (miscellaneous) Hazardous Material. Precautions to correctly handle the Flux Power Lithium Battery include: • The battery should only be handled by authorized personnel familiar with handling, storing and installation of a Lithium Battery.
LiFT Pack X48 User Guide Table Of Contents 1. Int o ct on……………………..……………………………………………………………………………………………. 4 2. Flux LiFT X49 Basics ……………………………………………………………………………………………………..4 2.1 Con t ct on …………………………………………………………………………………………………….. 4 2.2 Initial Startup ……………………………………………………………………………………………………. 5 2.2.1 In tallat on ….……………………………………………………………………………………….. 5 2.2.2 T ck Int g at on ……………………………………………………………………………………. 5 2.3 Charging …………………………………………………………………………………………………………...
Current Sensor Battery Management System (BMS) Figure 1: A diagram of the Flux Power LiFT X48 battery and its internal components The lithium-ion cells are large format lithium iron phosphate (LiFePO4) cells. They are clamped together and restrained to a blade to protect against shock and vibration. The cell interconnections are flexible bus bars providing solid and vibration resistant connections.
LiFT Pack X48 User Guide 2.2 Initial Startup To turn the battery on, press the power button. A green light will illuminate indicating the battery is on. The battery will click and take approximately 1-5 minutes before it can be charged or used.
(Isolated Bus) (Bus 1) (Bus 1) 2.3 Charger Use only a Flux Power approved charger for charging of all X48 batteries. Contact Flux Power for a list of approved chargers. 2.3.1 Charging When charging the battery, consider the following: •...
LiFT Pack X48 User Guide 2.4.2 State of Charge (SOC) Gauge The primary function of the SOC gauge is to display the amount of energy in the battery. When the battery is not charging, the SOC gauge will be steadily illuminated and display the SOC of the battery. When charging, the SOC LEDs will illuminate in sequence indicating it is charging.
The battery should not be used in equipment where submersion in water for any amount of time is possible. In the event the battery is submerged, please do not attempt to use or charge the battery. Contact Flux Power Support.