Chatsworth Products 36720-701 Installation Instructions Manual

URL: http://www.chatsworth.com/products/environmental-monitoring-and-security/electronic-locking-systems/econnect-electronic-access-control/
Safety Information
WARNING: Read and understand all instructions for proper installation and use of this product.
Installation Guidelines
1. Install the device in cabinets with a temperature no greater than 65˚C (149 °F)
2. Do not inhibit cabinet airflow with the installation of the device.
3. Avoid unstable mounting which could develop into a hazardous condition.
4. Do not block or obstruct access to the input/output ports in any way.
Mounting and Installation Instruction
1. Device comes with magnetic buttons. Select the preferred location and secure the device onto the cabinet.
2. An optional device external Bonding Strap (Part number: 024-717664-001) is included with the device, and is an enhanced feature for RFI and EMI noise
reduction when required. Follow Grounding and Bonding methods when connecting the Ground Wire to the Racks and/or Cabinets at customer discretion.
CPI Part Number: This document applies to the following CPI part number: 36720-701 – Networked Electronic Access Control Swinghandle Kit
Kit Includes:
•
1 Controller module
•
2 swing handles
•
3 door switches
•
2 wiring harnesses
•
2 mechanical override keys
Page 1 of 6
Networked EAC Controller
IIS-736720-001, Rev.1 10/17, T. Tu
www.chatsworth.com • techsupport@chatsworth.com
For domestic and international phone numbers, see our website or contact CPI Tech Support.
This drawing contains proprietary and confidential information and is protected by U.S. and international law.
Unauthorized reproduction, disclosure or use of the drawing or the information therein is expressly forbidden except
as agreed to in writing by Chatsworth Products, Inc.