REGEN-i BK-200S User Manual

Smartphone rework system

Advertisement

Quick Links

USER MANUAL
Smartphone Rework System
MODEL: BK-200S

- Table of Contents -

Thank you so much for purchasing the product of Regen-i.
Our company has always been dedicated to customer
satisfaction.
This user instruction and manual describes the functions of your
purchased product and instructions and precautions for handling
and using the product. All users of this product must read and
understand the contents of this user instruction and manual
before using and/or handling the product.
1. Purposes of Use and Features---------------------------------------2page
2. Installation the products------------------------------------------------2page
3. Handling the Products--------------------------------------------------3page
4. Operation of products--------------------------------------------------3page
5. Maintenance of products ---------------------------------------------9page
6. Troubleshooting----------------------------------------------------------9page
7. Product Warranty-------------------------------------------------------10page
8. Product Specifications-------------------------------------------------11page
www.regeni.com
-1-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BK-200S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for REGEN-i BK-200S

  • Page 1: Table Of Contents

    - Table of Contents - Thank you so much for purchasing the product of Regen-i. USER MANUAL Our company has always been dedicated to customer satisfaction. This user instruction and manual describes the functions of your purchased product and instructions and precautions for handling Smartphone Rework System and using the product.
  • Page 2: Purposes Of Use And Features

    1. Purposes of Use and Features 3. Handling the products 1) Purpose of Use 1) Do not touch the power cord and other electrical components with This product is manufactured with purpose of replacement SMD part wet hands. for Smartphone PCB and Small PCB under 200 mm(W*D) size. Be sure to wear heat-resistant gloves for operation because it is a heating device.
  • Page 3 3) Control Panel 4) Initial Setting Program ① Graph ② Default value(Factory setting) ① Program number is displayed for current applied program Prog. Sort Step1 Step2 Step3 Applied parts (Program number: 1~5(Pre-programed) / 6~9(User’s set up) Temperature ② At standby, the upper and lower parts are cross-lighting. When the E.T.C upper lighting, the current temperature of the upper heater is Holding time...
  • Page 4 5) Change of Program setting (Program number 6 to 9) ③ Upper air volume can be adjusted by 1 ~ 3 steps. Select the program number that you want to change by ⑦PROGRAM button on control panel and press the ⑧SET button to enter set value change mode.
  • Page 5: Maintenance Of Products

    6) Start and Stop for Heating 5. Maintenance of the products ① Heating Start: Heating is started based on the selected program. 1) Unplug the power cable when the product is cleaned. From the current temperature to the set temperature of STEP1, 2) Use dry cloths when the product is cleaned.
  • Page 6: Product Warranty

    Warranty Exception In the following cases, it will be subject to No Free Repair within the warranty period. Manufacturer: REGEN-I, INC. Improper operator's use, handling, storage, etc. Unauthorized use, alteration and repair Address: #1109, Daeryung Technotown 6, 648, Seobu saet-gil,...

Table of Contents