Huawei Y7p User Manual page 69

Fingerprint unlock is only available when your unlock method is set to Pattern, PIN, or
•
Password. You are required to unlock your Phone with the lock screen password when
restarting your device, as well as when your fingerprint is not recognized.
Before enrolling a fingerprint, make sure that your finger is clean and dry.
•
1
Open Settings.
2
Go to Security & privacy > Fingerprint ID > Change unlock method (or go to Security
& privacy > Fingerprint ID > Fingerprint management > Change unlock method), and
select Pattern, 4-digit PIN, Custom PIN, or Password to set a lock screen password.
3
Once you have set a password, touch New fingerprint to enroll a fingerprint.
4
Place your fingertip on the fingerprint sensor. Press down lightly on the sensor until your
device vibrates. Repeat this step using different parts of your fingertip.
5
After the enrollment is complete, touch OK.
To unlock the screen, simply place your fingertip on the fingerprint sensor.
Add or Modify a Fingerprint
You can enroll a maximum of five fingerprints on your device. You can also delete or rename
your fingerprints.
1
Open Settings.
2
Go to Security & privacy > Fingerprint ID (or go to Security & privacy > Fingerprint ID
> Fingerprint management).
3
Enter the lock screen password to access the fingerprint settings screen.
4
From there you can:
Enroll a new fingerprint: Touch New fingerprint, then follow the onscreen
•
instructions to enroll a fingerprint.
Rename or delete a fingerprint: Touch a previously enrolled fingerprint to rename or
•
delete it.
Identify a fingerprint: Touch Fingerprint recognition to identify and highlight
•
enrolled fingerprints.
Use a Fingerprint to Quickly Access Private Information
You can use your fingerprint to quickly access private information stored in your Safe or a
locked app.
1
Open Settings.
2
Go to Security & privacy > Fingerprint ID (or go to Security & privacy > Fingerprint ID
> Fingerprint management).
3
Enter the lock screen password to access the fingerprint settings screen. Enable Access
safe and Access app lock as required, then enter the password.
Now you can use your fingerprint to:
Security and Privacy
65