Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Crane Saunders I-VUE
Summary of Contents for Crane Saunders I-VUE
- Page 1 Saunders I-VUE Installation/ Assembly Instruction Saunders® I-VUE...
- Page 2 Index Components List Page 3 Schematic of Build Sequence & Operation Page 4 Installation & Operation Page 5-7...
- Page 3 Installation & Operation Components List: Physical Indicator Solenoid Green Electronics Housing Black base Saunders® I-VUE Target Air fittings (not supplied) Air Tube/Pipe (not supplied) Tools Required: · Phillips or Flat head screwdriver · 8mm open end spanner · Spanner to suit air fittings ·...
- Page 4 Installation & Operation Schematic of Build Sequence: 1. Screw target into actuator indicator (use low strength threadlock adhesive if vibration is a concern). Tighten into final position with 8mm spanner. 2. Check and confirm the product code is correct to customer specification.
- Page 5 Installation & Operation 3. Remove green electronics housing by 5. Fix black base to actuator cap using the untightening the three screws. two mounting screws. 4. Separate the black base and green 6. Fix green electronics housing to the black electronics housing base using the three screws.
- Page 6 Installation & Operation 7. Connect required air fittings to actuator. 9. Connect air tube/piping (as per customer specification). 8. Connect required air fittings to solenoid. 10. Connect power supply. Port = Air supply in Port 2 = Air supply to actuator...
- Page 7 Installation & Operation 11. Turn air supply and power supply On and 12. b. I-VUE screen reads "SURE." allow I-VUE to complete self-check sequence. 12. c. Confirm self-calibration by holding green side of I-VUE key over green S2 button. 12. Initiate self-calibration sequence: 12.
- Page 8 Crane Co., and its subsidiaries cannot accept responsibility for possible errors in catalogues, brochures, other printed materials, and website information. Crane Co. reserves the right to alter its products without notice, including products already on order provided that such altera- tion can be made without changes being necessary in specifications already agreed unless otherwise indicated.
Need help?
Do you have a question about the Saunders I-VUE and is the answer not in the manual?
Questions and answers