Download Print this page

Jet WiFi Messenger Alarm Quick Start

Download this manual

Before You Begin

Mount and wire your alarm according to installation instructions.

NOTE:

• Cellular WiFi hotspots are not recommended for use with

this WiFi alarm, as intermittent or unreliable notiﬁ cation

service can result.

• WPA2 Security must be enabled on the wireless router

for WiFi connections.

This quick start manual covers setup using a WPS

connection to your wireless network.

STEP 1: WiFi Network Setup (WPS)

POWER WPS INTERNET

JET

WiFi Messenger

Alarm Quick Start

1. Press the WPS button on your wireless

router (often the back side of router).

2. Press the WPS button on the JET WiFi

Messenger Alarm (the blue network status

light will flash continuously).

The blue network status light will illuminate

steadily when the JET WiFi Messenger Alarm

is successfully connected to the wireless

network.

Page 1 STEP 1: WiFi Network Setup (WPS) 1. Press the WPS button on your wireless router (often the back side of router). 2. Press the WPS button on the JET WiFi Messenger Alarm (the blue network status POWER WPS INTERNET light will flash continuously).
Page 2 QR code. 4. Follow the registration link. 5. After reading and accepting the terms of the JET WiFi Messenger Alarm, enter your alarm’s Unit ID# located on the back of the battery compartment cover. (DO NOT ENTER THE COLONS).
Page 3 2. Click Submit to save your notiﬁ cation data. STEP 4: Setup Testing 1. Press and release the “TEST” button on the JET WiFi Messenger Alarm. The alarm horn will sound and the alarm light will activate while the “TEST” button is being held.
Page 4 Notiﬁ cation email has been blocked. Unblock or allow emails from mywifialarm@mywifialarm.com in your email account. The JET WiFi Messenger Alarm terms and conditions have not been accepted and/or a • veri fication email has not been sent. Follow steps in the “Veriﬁ cation” section.