LINK-MI LM-WX500T User Manual

Hdmi/sdi wireless 500m

Table of Contents

Quick Links

Download this manual

Important Information...................................................................................... - 2 -

Special Notice:..........................................................................................- 3 -

Introduction........................................................................................................- 3 -

Product Details......................................................................................... - 4 -

Specification..............................................................................................- 4 -

Products Features:...................................................................................- 6 -

Mechanic Information............................................................................- 10 -

Transmitter(TX).............................................................................. - 10 -

Receiver(RX).................................................................................. - 12 -

Uses your equipment.................................................................................... - 15 -

For Transmitter....................................................................................... - 15 -

For Receiver........................................................................................... - 15 -

Use your TALLY and intercom system............................................... - 16 -

Channel setting.............................................................................................. - 17 -

TX channels changing.......................................................................... - 18 -

RX channels changing.......................................................................... - 18 -

Intercom system pairing........................................................................- 18 -

Trouble-shooting............................................................................................ - 18 -

FCC Statement...............................................................................................- 20 -

FCC Radiation Exposure Statement.......................................................... - 21 -

Cautions!......................................................................................................... - 21 -

- 1 -

Table of Contents

Need help?

Do you have a question about the LM-WX500T and is the answer not in the manual?

Questions and answers

Summary of Contents for LINK-MI LM-WX500T

Page 1: Table Of Contents
Table of Contents Important Information..................- 2 - Special Notice:..................- 3 - Introduction......................- 3 - Product Details..................- 4 - Specification....................- 4 - Products Features:...................- 6 - Mechanic Information................- 10 - Transmitter(TX)................- 10 - Receiver(RX).................. - 12 - Uses your equipment..................- 15 - For Transmitter..................
Page 2: Important Information
Important Information Please take the time to read this user manual before use the Product, it contains all notes and important information regarding your wireless HD video transmission system. Our limited warranty applies when the products is handled properly for intended use, in accordance with its operating instruction.
Page 3: Special Notice
Introduction LINK-MI LM-WX500T This equipment is designed to replace the current widely used cable in the live broadcasting and production environment, it can be used in film production, live broadcasting as well as many application which requires good quality wireless video connection.
Page 4: Product Details
Product Details LM-WX500T is main consist of one Transmitter (TX) and one Receiver (RX). Specification ITEM SPECIFICATION 5.1-5.9(GHz)*Subject different regulations in different regions. Frequency range 2.4-2.483GHz with ISM band - 4 -...
Page 5 OFDM/40MHz for video Modulation method and Bandwidth GFSK/1MHz for intercom system 1080p 23.98/24/25/30/50/60 1080psf 23.98/24/25 Video Formats 1080i 50/59.94/60 Supported 720p 50/59.94/60 576p 576i 480p 480i Audio Formats PCM, DTS-HD, Dolby TrueHD Supported Time Code SMPTE-12M Transmission Range Up to 2000ft(Line of sight) Transmitter External Antenna 5G ×...
Page 6: Products Features
Receiving Sensitivity -70dBm SDI Dual Output; HDMI Output; Mini USB; LEMO Power IN; Antenna RPSMA Socket; Functional Interface Power ON/OFF, 3.5mm HP/MIC socket;3.5mm TALLY socket; LEMO 6 needle Locating Structure 1/4” Hot-shoe connection Channel Info; Signal Strength; Power Info; OLED Display TALLY indicator Power Source 9-18V for DC input;...
Page 7 Multicast support  Support one transmitter to multi receivers. User can set channel to pair the transmitter and receivers.  License free operation frequency The wireless frequency is 5.1-5.9GHz and 2.4G ISM band, license free operated. Built-in fan  TX side built-in high efficiency ventilation fan with very small noise. Fan control ...
Page 8 Remark: Fix the three antennas to the transmitter and arrange them to be a angle as below figure to get better performance. On transmitter side, when both SDI and HDMI source are inputted, the transmitter will automatically select the SDI source for transmission Fix the six antennas to receiver and arrange them to a angle as figure to get better performance.
Page 9 Set the receiver higher will enhance the transmission distance. - 9 -...
Page 10: Mechanic Information
Mechanic Information Transmitter(TX) - 10 -...
Page 11 STRUCTURE OLED Display Displays information of channel, Video status, signal strength; Battery voltage indicator, inside temperature,MENU information VOL +/UP Button Normally, it is a Volume +. It will be UP function when system is in MENU mode VOL -/DOWN Button Normally, it is a Volume -.
Page 12: Receiver(Rx)
DC power IN(Lemo) Support 9-18V 5G Antenna Connectors RPSMA connectors for 5G antennas Battery Clip Battery compartment, for F550/F970 battery 2G Antenna Connector SMA connector for 2.4G antenna Receiver(RX) - 12 -...
Page 13 STRUCTURE 5G Antenna Connectors RPSMA connectors for antennas OLED Display Channel, signal strength, battery voltage, audio Volume and MENU. MENU Button Unlock and Confirm the Selection LEFT/UP Button Select Channels RIGHT/DOWN Button Select Channels V+/UP Button - 13 -...
Page 14 Volume + V-/DOWN Button Volume - BAT-OUT Provide DC power from the battery for external device INTERCOM 6pin LEMO for Tally and Intercom system 3.5mm External TALLY Output Interface Its maximum output current is 20mA, i.e, it just drive a LED 3.5mm MIC/HP Interface Connect to an external headphone HDMI OUT...
Page 15: Uses Your Equipment
Uses your equipment For Transmitter Fix the three antennas(5G x2, 2.4G x1)respectively Connect SDI or HDMI video source to the “SDI IN”/”HDMI IN” of transmitter (when both SDI and HDMI video are inputted, it will auto select the SDI video for transmission) If need, you can connect the SDI out(loop through) to other equipment as well Connect the DC power to the transmitter or put F550/F970 battery into...
Page 16: Use Your Tally And Intercom System
Use your TALLY and intercom system - 16 -...
Page 17: Channel Setting
Step1 、 After above connected, power on both Transmitter and Receiver. Step2、On Transmitter side, you just hear the sound from broadcast director when you do not press down the button “TALK” on converter box; Step3 、 When the “TALK” button is pressed and held on, both broadcast director and operators can conversation normally.
Page 18: Tx Channels Changing
TX channels changing Step1: Power on the Transmitter Step2: Press “MENU” button first, then press “UP” or “DOWN” button to choose “Channel Set” on screen, press “MENU” again to confirm. Step3: Press “Up” or “DOWN” button to choose channel, then press “MENU”...
Page 19 TROUBLES&POSSIBLE REASONS: SOLUTION: Displaying “Waiting for connection…” for a long time Transmitter is not powered up. Power on the transmitter. Transmitter or receiver is not placed Place the TX or RX correctly. correctly. The transmitter and receiver are too Move receiver closer far away.
Page 20: Fcc Statement
Bad contact of the cable of receiver or Remove then re-plug the SDI/HDMI TV/Monitor. cable. TV/Monitor turn into standby mode. Switch TV/Monitor normal operation mode. Abnormal working of receiver. Reboot the receiver. No image appear on TV/Monitor Bad contact of receiver or cable. Re-plug the cable of the receiver or TV/Monitor.
Page 21: Fcc Radiation Exposure Statement
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.

LINK-MI LM-WX500T User Manual

Quick Links

Table of Contents

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LINK-MI LM-WX500T

Summary of Contents for LINK-MI LM-WX500T

Table of Contents