Assembly Instructions Step 1: Place washer on the screw clamp and insert into rail, then put the back plate Step 2: Tighten the screw in clockwise direction. Step 3: Place the rail over tub side, and tighten the clamp to the bathtub. Operating Instructions Before use, verify that the Bathtub Safety Rail is secured by pulling it from side to side and front to back.
Page 3
This warranty shall become void if the product is in any way modified, improperly adjusted or abused. MHBTR MOBB Health Care USA LLP 59 SW 12th Ave #101 Dania Beach, FL, 33004 Tel: (754) 210-3130 Fax: (754) 263-3978 www.mobbhhcusa.com...
Need help?
Do you have a question about the MHBTR and is the answer not in the manual?
Questions and answers