Microh LEDP64(K) Manual

MICROH
This device is a lighting product which can create decorative effects. It is designed for club, stage
and other entertainment halls.

Specification:

1. Weight: 2.5kg
2. Size: 31X23X23 cm
3. Power Input: AC 120V 60Hz
4. Wattage: 30W
5. LEDS: ultra bright 10mm, 181PCS RGB (36 RED, 85 GREEN, 60 BLUE)
6. XLR: 3PIN female XLR socket and 3PIN male XLR socket
7. Built-in microphone
8. Led display

Operation:

1. Use the MODE button to choose required working mode, then use UP and DOWN to adjust the
relative reference date
A Color: LED display shows "C.L.X", "X"= 0-7. Press UP or DOWN button to adjust "X".
0---BLACK
7---white
B Color Change: LED display shows "J. X X", "X X"= 01-99 means the speed of color change.
Press UP or DOWN button to adjust the speed of color change.
C Color Fade: LED display shows "F.X.X", "X X"= 01-99 means the speed of color fade,
press UP or DOWN button to adjust the speed of color fade.
D Auto Mode: LED display show "A - -", it will auto run the color change and color fade.
E Sound mode: LED display shows "S.XX", "XX"=00-31 means levels for sound sensitivity.
Press UP or DOWN button to adjust the levels of sound sensitivity.
F Slave mode: LED display shows "S.L.A." the master fixture decides the running state of
current fixture the above A-E all have master function.
1---RED 2---green
- LEDP64(K)
Manual
3---blue 4---purple 5---yellow 6---cyan
1 of 2