Page 2
Charging your QuantiCheck Turn on QuantiCheck ® ® USB-C charging cable Ensure your QuantiCheck is fully charged before Press and hold power button until green ® use. Charging can be done via the USB-C port light flashes then release. on the side of the device.
Page 3
A green light illuminates on the LED indicator for a passed test. Perform fit check LED indicator - Over breath Squeeze or press and hold QuantiCheck ® Rapid flashing purple light indicates over breath. perform check. Draw a breath until the blinking Wait a few seconds for purple light to blink slowly.
Page 4
Turn on Bluetooth ® Services A red light blinking on the LED indicator for a Download and install the QuantiCheck failed check. Wait until the LED indicator flashes ® app on your device. purple signalling a retest for the fit check.
Page 5
Connect to your device Don your mask and perform a fit check *Wait for the app to discover your QuantiCheck device Attach QuantiCheck to mask and don. To perform a ® ® fit check - “see point 6 on how to perform a check.
Page 6
06-11-2019 14.28:04 Users View your results Passed fit check CHOOSE USER RESULT To see the list of results press the ‘Reports’ icon A positive pull fit check trace line shows a single large fluctuation, followed by a gently increasing on the foot of the app.
Page 7
Contact us OHD LLLP Tel: +1 (205) 980 0180 www.ohdglobal.com Technical Support techsupport@ohdglobal.com Manufactured by Design Reality...