Connection To Power - Yoer Crystal EK02 User Manual

ENGLISH

CONNECTION TO POWER

For your own safety read the following instructions carefully before attempting to connect this unit to the
mains.
- Before connecting, check that the voltage indicated on the appliance (bottom of the appliance) corresponds with the
main voltage in your home. If this is not the case, consult your dealer and do not use.
- This unit must be earthed. This equipment must be disconnected from the mains when not in use. Do not allow this
unit to be exposed to rain or moisture.
- You should only plug the appliance into a 220V-240V AC, 50Hz supply. Connecting it to other power sources may
damage the appliance.
OPERATING INSTRUCTIONS
Filling
- Remove the kettle from the base when filling.
- To fill the kettle, open the cover by lifting the lid.
- Fill to the desired level (Min 0.8 L~Max.1.7L)
- Close the lid by pressing it down until it clicks into place.
Switching on
- Plug the power supply cord into the mains.
- To switch on the kettle, press the On/Off switch downwards. The power indicator lights up.
Switching off
- When the water has boiled the kettle will automatically switch itself off.
- You can stop the boiling process at any time by lifting the On/Off switch. The power indicator will go out.
Note: Do not open the lid when steam is coming out of the spout.
Kettle is only to be used with the stand provided.
6