Download Print this page

crescendo 7200 G3 Quick Start Manual

Processor upgrade card for power macintosh 7200/8200 computers

Advertisement

Quick Links

CRESCENDO
Processor Upgrade Card for Power Macintosh
Quick Start Guide for Crescendo
System Compatibility
At this printing, Crescendo/7200 processor upgrade cards are compatible with
System 7.5.3 through Mac
OS 9.1. For up-to-date Mac OS compatibility, check
®
our website.
Remember to register your product online at
http://resgistration.sonnettech.com to be informed of future upgrades and
product releases.
You Should Have
The following items should be included in your product package:
• Crescendo/7200 processor upgrade card
• Crescendo/7200 Install diskette
• Powered by Sonnet label
The following items may be required for installation:
• Medium Phillips screwdriver
• Flat blade screwdriver
• Pliers
You may need the following items:
• Additional physical RAM (5V , 64-bit-wide, 168 pin, fast-paged mode, 70 ns
DIMMs)
System Requirements
The Crescendo/7200 requires the following in order to operate in your system:
• One available PCI slot
• Minimum of 16MB physical RAM for System 7.5.3 through Mac OS 8.6 (8MB
RAM minimum left on the logic board), 32 MB for Mac OS 9.0 and Mac OS 9.1
(8MB RAM minimum left on the logic board.) You must also install enough
additional RAM on the Crescendo/7200 to meet the minimum requirements of
the Mac OS version you are using. In all cases, the more RAM installed on the
Crescendo/7200, the better.
Support Note:
We recommend you make a backup of important information
on your system's hard drive(s) prior to installing new hardware or software. When
handling computer products, you must take care to prevent components from being dam-
aged by static electricity. Always ground yourself by touching a grounded metal part of the
computer such as the power supply's metal case and work in an area free of static electricity;
avoid carpeted areas. Handle the Crescendo/7200 only by its edges and avoid touching
connector traces, component pins on PCI cards and other components inside the computer.
WARNING—You must install the Crescendo/7200 Software before
installing the Crescendo/7200 card!
Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.
Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com.
Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: support@sonnettech.com
Sonnet Technologies, Inc., 15 Whatney, Irvine, California 92618-2808 USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350
©2000 Sonnet Technologies, Inc. Revised 2003.All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Crescendo are trademarks of Sonnet Technologies, Inc. Macintosh and Mac are trade-
marks of Apple Computer, Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice.
Printed in the USA.. QS-MG-020603-E
7200
G
/
®
7200/8200 Computers
/7200
3
back view
front view

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7200 G3 and is the answer not in the manual?

Questions and answers

Summary of Contents for crescendo 7200 G3

  • Page 1 Sonnet Technologies, Inc., 15 Whatney, Irvine, California 92618-2808 USA • Tel: 1-949-587-3500 Fax: 1-949-457-6350 ©2000 Sonnet Technologies, Inc. Revised 2003.All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Crescendo are trademarks of Sonnet Technologies, Inc. Macintosh and Mac are trade- marks of Apple Computer, Inc., registered in the United States and other countries.
  • Page 2 Mac OS 9 to take advantage of the Crescendo’s features and speed. If you are not upgrading your Mac OS software at this time, skip to the next section, “Install Sonnet Software.”...
  • Page 3 Power Macintosh 7200, 7215 and Workgroup Server 7250. If you are installing the Crescendo card into a Power Macintosh 8200, skip to page 6. 1. Shut down your computer. If the computer has been on for any length of time, wait a few minutes for it to cool before beginning the installation.
  • Page 4 Remember, you must leave at least 8MB of memory installed on the system’s logic board, and install a minimum of 8MB of memory on the Crescendo/7200 if you are using System 7.5.3 to Mac OS 8.6. For Mac OS 9 and OS 9.1, Figure 10 you must leave at least 8MB of memory installed on the system’s logic board, and install a...
  • Page 5: Figure

    Hardware Installation—Power Mac 7200, 7215, WGS 7250 (continued) Crescendo/7200 processor card 13. Align the Crescendo/7200 over the PCI slot (Figure 13). Gently press down on the card until it is firmly seated. PCI slot Figure 13 14. Rotate the internal assembly into the computer’s case (Figure 14).
  • Page 6 DIMM slots. This process requires technical knowledge. If you only plan to add security screw security screw new DIMMs to the Crescendo card, this will not be an issue. If you feel you are unable to Figure 18 install the computer hardware, contact a qualified technician.
  • Page 7 8MB of memory on the Crescendo/7200 if you are using System 7.5.3 to Mac OS 8.6. For Mac OS 9 and OS 9.1, you must leave at least 8MB of memory installed on the system’s logic board, and install a ejector minimum of 24MB of memory on the Crescendo/7200.
  • Page 8 DIMMs’ notches with the small guides inside the slot. Figure 31 22. Orient the Crescendo card so the DIMM slots are face up and the bracket is DIMM on the right (Figure 32). Add some support, such as a piece of cardboard, support under the upper left corner of the Crescendo card to keep it level.
  • Page 9 Support Note: port access cover You may install the Crescendo in any of the three PCI slots, but because of the amount of space occupied by the card with DIMMs installed, we recommend installing it into the slot labeled A1. If you install it into either slot A2 or A3, you will not be able to utilize all three PCI slots in your system.