Gordon 98652 Instructions And Precautions

InstructIons and precautIons
saVe tHese InstructIons. read all
precautIons and InstructIons.
©
Copyright 2008 by Harbor Freight Tools
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
specIFIcatIons
Magnification
Field of View
Lens
Focal Length
Eye Relief
Near Focus
Focus Adjustment
Maximum Height of Stand
Angular Field of View
unpackIng
When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown above as soon as possible.
Important saFetY
InFormatIon
assembly precautions
1. Assemble only according to these instruc-
tions. Improper assembly can create haz-
ards.
spottIng scope
98652
distributed exclusively by Harbor Freight tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
®
. All rights reserved. No portion of this document or any artwork contained
23 x ~60
147' at 1000 yards
Multi-Coating Construction
14.09"
0.67"
19.68'
Ribbed Ring at Lens Front
47"
2.25°
23 x ~60
WItH stand
2. Keep assembly area clean and well lit.
3. Keep bystanders out of the area during as-
sembly
4. Do not assemble when tired or when under
the influence of drugs or medication.
use precautions
1.
Never look at the sun using the Spotting
Scope. Severe eye damage is likely to
occur.
2. Keep this manual for the safety warnings and
precautions, assembly, operating, inspection,
maintenance and cleaning procedures. Write
the product's serial number in the back of the
manual (or month and year of purchase if
product has no number). Keep this manual
and the receipt in a safe and dry place for
future reference.
3. This product is not a toy. Do not allow chil-
dren to play with this item.
4. Use for intended purpose(s) only.
5. Inspect before use; do not use if parts are
loose or damaged.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
®
.