Advertisement
Quick Links
Z4-SERIES SEISMICFRAME PDU BRACKET
Safety Information
WARNING: Improper use of this product may lead to serious
injury.
Read and understand all instructions for proper
installation and use of this product.
WARNING: When installing PDU, ensure power cords are routed
and secured to prevent risk of cord getting pinched.
Included Hardware:
M6 X 20mm Taptite FHCSK TORX Screw, 8 ea.
Tools Required:
T30 Torx driver
Installation Instructions
The PDU Bracket assembly (Fig. 1) attaches to the cabinets slides.
Installation Instructions
IIS-714480, 01/7/14, Rev. 1, CPI/BMO
800-834-4969 (USA & Canada) • www.chatsworth.com • techsupport@chatsworth.com
For international phone numbers, see our website or contact CPI Tech Support.
This drawing contains proprietary and confidential information and is protected by U.S. and international law. Unauthorized reproduction, disclosure or use of the drawing
or the information therein is expressly forbidden except as agreed to in writing by Chatsworth Products, Inc.
Page 1 of 2
PDU adapter
bracket
Punched arrow
Fig. 2
Fig. 1
PDU BRACKET.
M6 X 20mm
Taptite FHCSK
TORX Screw
PDU mounting
bracket
Advertisement
Summary of Contents for Chatsworth Products Z4 Series
- Page 1 This drawing contains proprietary and confidential information and is protected by U.S. and international law. Unauthorized reproduction, disclosure or use of the drawing or the information therein is expressly forbidden except as agreed to in writing by Chatsworth Products, Inc.
- Page 2 Installation Instructions Z4-SERIES SEISMICFRAME PDU BRACKET 1. Position the PDU Adapter Bracket at the desired location along the cabinet slides. Fasten bracket using M6 X 20mm Taptite FH into the top 2. Align the PDU bracket to the adapter bracket in the correct orientation. and bottom slides (Fig.