Page 1
Instruction Manual Vertical Drum Lifters/Dispensers 12R538 12R541 Note: Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain this product. Failure to comply with these instructions could result in personal injury and/or property damage!
The factory reserves the right to modify its own products at any moment without notice and incurring in any sanction. So it is suggested to always verify possible updates. 1. FIGURE AND SPECIFICATION Manual Type 12R538 Figure 1 Figure 2 - 2 -...
Page 4
Model Weight (In) (In) (In) (In) (In) (Lbs) (Lbs) 12R538 11-1/4 23-1/2 3-1/2 12R541 11-1/4 3-1/2 Drum holder width is 7-7/8 in For 12R541, F=33 In *: Capacity load for full drum is 800 lbs; capacity for half full drum is 500 lbs.
(5) Geared driver assembly (6) Chain wheel 3. WARNING (1) The 12R538 and 12R541 are intended for use with 55 gallon steel drum only. Do not attempt to use with plastic drums. For fiber drums, order and install the 4W966 (FBA adapter) option.
Inspect the clamp to make certain it is tight. (3) Ensure that the lifter ring (See Fig. 5 & 6 Ring) on the 12R538/12R541 is connected to the crane or hoist hook with a self-locking device before lifting the drum.
7. EXPLODED VIEW & PART LIST 12R538 Ring Figure 5 - 6 -...
Page 8
Description Description Rubber Bushing Connecting Board Geared Spanner Retaining Ring Locating Pin Hexagon Bolt Spring Spring Welding Chassis Pawl Pull ring Lock-Pin Lift Assembly Spring Drum Holder Clamping Board Clamped Ring Chain Spring Connecting Ring Bolt - 7 -...
Description Description Rubber Bushing Bolt Geared Spanner Lift Shaft Washer Bush Hexagonal Bolt Aligning Ring Spring Aligning Bolt Pawl Aligning Ring Bush Clamped Board Chain Guideway Spring Chain Wheel Chain Aligning Pin Clamped Ring Clamped Ring Chain Wheel Spring Chain Drum Holder Chain Wheel Axis Chain...
Need help?
Do you have a question about the 12R538 and is the answer not in the manual?
Questions and answers