Summary of Contents for Floorex Products Satellite 480 Generation3
Page 1
SATELLITE 480 (SP) Generation3 SAFETY & OPERATORS MANUAL & PARTS LISTING CAUTION: Read the instruction manual before using the appliance. V07082019...
SATELLITE 480 Generation3 Page 2 Specifications Satellite 480 Generation3 Weight 160kg (182kg including weights) Head Pressure 112kg (134kg with weights on head) Dimensions 543 x 1007 x 1447 (Width x Height x Length) Rated Voltage 230 Volt 50 Hz Rated Watts...
The operator and maintenance personnel must physically be able to handle the bulk weight and power of this machine. 3. The SATELLITE 480 Generation3 must only be used according to the instructions given in this manual. Any other work methods or practices could result in injury or death 4.
SATELLITE 480 Generation3 Page 4 Safety instructions 18. Do not modify machine in any way. Only use genuine SATELLITE parts and accessories. 19. Repairs should be performed by qualified persons only. 20. Ensure parts have stopped moving and disconnect power or spark plug when servicing or changing blades or accessories.
28. Wear clothes suitable for the job and for the work place including, safety shoes, hard hat, hearing protection, non-fogging vented safety goggles, and dust respirator suitable for dust. 29. The SATELLITE 480 Generation3 must only be used according to the instructions given in this manual. Any other work methods or practices could result in injury or death 30.
Operating Instructions 46. The SATELLITE 480 Generation3 has axle height adjustment to make it easy to adjust the machine so it doesn’t cause fatigue on the operator. To set axle height, adjust the axle height leaver to the vertical position, or midpoint.
Page7 SATELLITE 480 Generation3 Handle Positions 57. The handle on this machine can be locked in different positions for different purposes. These positions must only be used for the purpose intended as outlined in this manual. . Failure to comply could result in bodily injury.
SATELLITE 480 Generation3 Page 8 Tooling position & Magnetic plugs 59. It is very important to remove all plugs from the unit before installing standard Diamond Plugs. This includes Magnetic and for the SP machines, the SP Drive System. 60. To remove tooling from the magnetic plugs, Tilt the machine to the tooling position as per instructions in the operating instructions and grasp hold of the diamond disk and give it a sharp pull away from the main black disk.
Page9 SATELLITE 480 Generation3 Magnetic plugs 67. Ensure the insert is not worn to less than 20mm diameter where the blade runs on the insert. This is equivalent to the diameter of the section above it. 69. Put the insert through the satellite disk and install the two parts onto the plug ensuring the insert goes completely into the plug.
SATELLITE 480 Generation3 Page 10 Axle height adjustment 75. This machine is designed to operate with the wheels in contact with the floor at all times. Do not operate with wheels off the floor. 76. There is a level bubble provided (located behind the motor) for levelling the machine for best user experience and coupling life.
Page11 SATELLITE 480 Generation3 Display Functions 78. The Generation3 Grinders feature a display screen with a backlight. This is a new feature that greatly enhances the user experience in that the operator knows what the machine is doing, taking a lot of the guess work out of the job.
SATELLITE 480 Generation3 Page 12 Electrical safety 85. All electrical maintenance and repairs are to be carried out by qualified persons only. 86. CAUTION - Line terminals may be alive when main switch is in the off position. Disconnect the machine completely before performing any maintenance or repairs.
Page13 SATELLITE 480 Generation3 Problem solving 102. Diamond Grinding has many variables. When you understand some of these, you can solve a lot of problems without a lot of bother and expense. PROBLEM CAUSE REMEDY EXPLAINATION No power is present at...
Page27 SATELLITE 480 Generation3 Warranty This Warranty covers the Satellite Generation3 Machines for periods noted in the table below. Machine/Item Period Notes and additional Options All Satellite Generation 3 machines 2 years Cycloid Transmissions 2 years An extra 3 years is offered, extending warranty to 5...
Page 29
SATELLITE 480 Generation3 Page 28 Floorex Products Your complete supplier of all your concrete surface preparation needs • Diamond grinders • Dust extraction • Shotblasters • Screed mixers • Diamonds • Floor Scrapers • Coating application FLOOREX PRODUCTS 11 Jennings Road Swan Hill VIC.