Page 1
ASSEMBLYINSTRUCTIONS 750 TENT BED Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware.
Page 2
Part List - 750 TENT BED LABEL MANUFACTURE 1/4" Half Moon 7,0 x 70 Screw 1/4 x80 Screw 10 x 40 Wood Dowel 7,0 x 50 Screw 7,0 x100 Screw 4,0 x 30 Screw Hex Screwdriver...
Page 3
10 x 40 Wood Dowel Front Post number here 7,0 x100 Screw Hex Screwdriver...
Page 5
ATTENTION on the velcro applied on the Tent. After this step, Tent s i v e A d h e crossbars and on front side rail like showing on instructions. 7,0 x 50 Screw 4,0 x 30 Screw 7,0 x 70 Screw Hex Screwdriver...
Page 6
7,0 x 50 Screw Hex Screwdriver The first slats must be fixed here at 3" from each headboard end. Install slats kit with spacer 4,0 x 30 Screw tape on top (Facing up).
Page 7
SLIDE LABEL MANUFACTURE With holes 7,0 x 50 Screw Hex Screwdriver WARNING THE MATTRESS SURFACE MUSTNOT BEABOVETHIS LINE 8” “MATTRESS HIGH LIMITED” 7,0 x 50 Screw Hex Screwdriver...
Need help?
Do you have a question about the 750 and is the answer not in the manual?
Questions and answers