Maintenance - HoMedics 3D SHIATSU DELUXE Manual

PRODUCT FEATURES: Convenient and Portable. Perfect for use at home or in the office.
Heat Button
For soothing heat, when massage is on, simply press
the heat button and the massage nodes on the neck
unit will illuminate. To deselect, press the button
again and the corresponding massage nodes will stop
glowing.
Power Button
To turn on the massage functions, press the POWER
button once. The massage will begin in high speed.
Press the button a second time for medium speed, a
third time for low speed and a fourth time to switch off
the massager.
Shiatsu Reverse Button
The massager will begin with an inward rotating
motion. To change the direction of the massage
nodes simply press the SHIATSU REVERSE button and
the nodes will begin rotating in an outward motion.
Pressing the button again will change the direction
back to an inward rotating direction.
The actual product materials and fabrics may vary from the picture shown.
INSTRUCTIONS FOR USE:
1. Plug adaptor into a 220-240V AC outlet and plug the receptacle end into the
input jack, located along the handle of the neck massager.
2. Place massager around neck (Fig. 1) or area of back you wish to massage.
Convenient straps help assist in easy positioning and intensity control (Fig.2).
Note: Do not use this product for more than 15 mins at a time.
There is a 15 minute auto shut-off on this appliance for your safety. This feature
should not be considered as a substitute for 'OFF'. Always remember to switch
the appliance off when not in use.
Fig. 1

MAINTENANCE:

Cleaning
Unplug the appliance and allow to cool before cleaning. Clean only with a soft,
slightly damp sponge.
• Never allow water or any other liquids to come into contact with the appliance.
• Do not immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, glass / furniture polish, paint thinner etc
to clean.
Storage
Place the appliance in its box or in a safe, dry, cool place. Avoid contact with
sharp edges or pointed objects which might cut or puncture the fabric surface.
To avoid breakage, DO NOT wrap the power cord around the appliance. DO NOT
hang the unit by the cord.
Fig. 2