Page 2
READ THESE INSTRUCTIONS BEFORE USING THE CHARGER The battery charger is only designed for indoor use and should not come into contact with water or dust. In order to avoid overheating, the charger should not be covered when it is in use. Chargers filled with molding material are splash-proof, but must not be IP67 immersed in water over long periods of time.
Page 3
WARNING Explosive gases can arise while charging. Avoid sparks and open flames. Verify that there is adequate ventilation while charging. The charger should not be used in the vicinity of flammable anesthesia gases. Avoid chargers with plastic casing coming into contact with oils, grease, etc., as most types of plastic can be broken down by chemicals and solvents.