Download Print this page

DeWalt DC901 Instructions Manual page 35

Hide thumbs Also See for DC901:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 29
Storage Recommendations
1. The best storage place is one that is cool and
dry away from direct sunlight and excess heat or
cold. For optimum battery performance and life,
store battery packs at room temperature when
not in use.
NOTE: Li-Ion battery packs should be fully
charged when stored.
2. Long storage will not harm the battery pack or
charger. Under proper conditions, they can be
stored for up to 5 years.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual
before use.
Do not expose to water.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Do not use damaged chargers.
Charge only between 4° C and 40° C.
Have defective cords replaced immediately.
Charger problem.
Battery problem.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
Charge only with dedicated D
chargers.
See technical data for charging time.
Package Contents
The package contains:
1 Cordless midhandle driver/drill
1 Side handle
1 Battery pack (DC901K/DC910K)
2 Battery packs (DC901KL/DC910KL)
1 Charger
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
NOTE: Battery packs and chargers are not included
with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fi g. A)
INTENDED USE
Your drill/driver has been designed for professional
drilling, percussion drilling and screwdriving
applications.
DO NOT use under humid conditions or in presence
of flammable liquids or gases.
These drill/drivers are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators
use this tool.
1 Variable speed switch
2 Forward/reverse slider
3 Keyless chuck/auto spindle lock
4 Torque adjustment collar
5 Mode selector
6 Three-gear selector
7 Bit holder
8 Grip
9 Side handle
WALT
E
10 Battery pack
11 Release button
12 Charger
13 Charging indicators (red)
E N G L I S H
WARNING: Never modify the power tool
or any part of it. Damage or personal
injury could result.
33

Advertisement

loading

This manual is also suitable for:

Dc910