Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for jobmate YT7821
-
Page 2: Table Of Contents
CONTENTS Know Your Product....................3 Technical Specifications..................3 Description of Symbols................... 4 Contents of Blower....................5 General Safety Instructions..................6 Additional Safety Instructions for Blower..............8 Assembly Instructions.................... 8 Operation....................... 9 Starting and Stopping ..................9 Blowing......................9 Maintenance......................10 Warranty ........................11... -
Page 3: Know Your Product
KNOW YOUR PRODUCT 1 Handle 2 Trigger switch 3 Battery pack 4 Rear blower tube 5 Front blower tube TECHNICAL SPECIFICATIONS Battery 18V Li-ion, 1500mAh No-load speed 11000/min Working time 10 min Wind speed 120-220 Km/h Battery charging time 1hour... -
Page 4: Description Of Symbols
DESCRIPTION OF SYMBOLS The rating plate on your tool may show symbols. These represent important information about the product instruction on its use. Denotes risk of personal injury, loss of life, or damage to the tool in case of nonobservance. Use eye protection. -
Page 5: Contents Of Blower
DESCRIPTION OF SYMBOLS (CONT.) This symbol is known as the ’Crossed-out Wheelie Bin Symbol’ .When this symbol is marked on a product or battery, it means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment. -
Page 6: General Safety Instructions
GENERAL SAFETY INSTRUCTIONS WARNING! Read all instructions. Failure to follow all the instructions listed in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) Work area •... - Page 7 GENERAL SAFETY INSTRUCTIONS (Cont.) that have the switch on may cause an accident. • Remove any adjusting key or wrench before turning the power tool on. A wrench or key left attached to a rotating part of the power tool may result in personal injury.
-
Page 8: Additional Safety Instructions For Blower
ADDITIONAL SAFETY INSTRUCTIONS FOR THE BLOWER • Disconnect cordless blower from the power supply when not in use or when servicing or cleaning. Do not leave unattended. • Check damaged parts—before further use of the blower. Any part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. -
Page 9: Operation
ASSEMBLY INSTRUCTIONS (Cont.) Tube assembly To attach the tube to the blower, line up the tube with the blower housing as shown. Pushed the tube into the blower housing until the lock button engages the lock hole in the tube. OPERATION Avoid collisions with hard objects which could damage your machine. -
Page 10: Maintenance
MAINTENANCE Make sure the battery is detached from the unit, and then use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. Important: To assure product safety and reliability, repairs maintenance and adjustment should be performed by a qualified individual always using identical replacement parts. -
Page 11: Warranty
WARRANTY POLICY Congratulations on your purchase of Li-ion Blower. In order to get maximum benefit from your new purchase, please be aware of the warranty provisions outlined in this document. 2 YEAR [REPLACEMENT/REPAIR] WARRANTY Your Li-ion Blower is guaranteed for a period of 24 months from the original date of purchase. - Page 12 Mitre 10 or Mitre 10 MEGA store where the product was purchased from, for the warranty to be applicable. Please retain your Proof of Purchase. Only the original owner is covered by the manufacturer’s warranty and must have purchased the product from a Mitre 10 or Mitre 10 MEGA store in New Zealand. What is not covered under warranty? •...
Need help?
Do you have a question about the YT7821 and is the answer not in the manual?
Questions and answers