1. Attention/Safety instruction 1. Do not operate this electric bike without fully reading and understanding its operations and limitations. 2. Before riding each time ensure all parts are in good order. 3. Ensure you observe traffic rules and regulations when using this electric bike.
2. Check Before Use 1. Are the brakes working correctly? 2. Are the batteries sufficient charged? 3. Is the handle bar attachment and saddle post correctly insterted and tight? 4. Are the wheel hub mounting nuts correctly installed? 5. Is the horn working correctly? 6.
3. Product Information Parts Name Specifications Parts Name Specifications Motor 250 Watt (Brushless) Frame Alloy 6061 Battery 36 volt 7.8 amps Gearing 21 speed Shimano Range per charge 25-30 km(electric) Fork/suspension Adjustable suspension 45-50km(PAS) fork Power assistant Upto 25kmph Wheel size 26’...
4. Installation Instructions When open the bike’s carton box,take out ebike and use scissors to cut off the package strings. Install the handle bar: ● Use the Allen key to lossen the steam cover, adjust the handle bar position and angle properly before tighten all the bolt.
5. How to use 5.1 Display ● The display provides information on Speed, Distance travelled, Battery remaining (State of Charge), Voltage of Battery and Odometer. ● The display by default shows the speed of the motor and the State Of Charge of battery in graphical form.
The Horn switch is connected to the horn output on the LED Light unit. ● The Light switch is a toggle type switch which can be used to switch ON/OFF the LED light unit. Make sure this switch is in off position before switching off the TOROID E Bike.
● The button on the top left is the lock function. This button is to be used the lock down the TOROID E Cycle after use. If the TOROID E Cycle is moved during locked condition the burglar alarm will sound. Please note that the battery needs to be plugged in for the lock function and alarm to work.
6. Battery Information 6.1 Charging the battery ● Toroid E-bike provide removable battery can be easily removed and take out to charging. ● Plug the charger into charging port of battery,LED in the battery charger will be illuminated RED when charging.The LED will change to GREEN when battery is Fully charged.
Page 11
6. Battery Information 6.2 Battery & Charger maintenance and precautions ● The battery and charger should be kept in clean, dry and ventilated area avoid contact with corrosive substance and keep away from excess heat and open flame. ● Do not open battery casing under any circumstance on your own. Warranty will be void if battery is opened by any unauthorised persons.
7. Cycle Inspection & Care Keep display in upright position for easy viewing during riding. Protect display cum throttle unit from shocks. Any physical damage to the unit is not covered under warranty conditions. The unit is water resistant but not waterproof. Avoid exposure to heavy rains. 4.
8. Warranty 1. You are provided with a warrenty for one year since the day you buy the Toroid E-bike. 2. Non electronic parts are not covered under warranty of the TOROID E Cycle. Have a pleasant ride!
Need help?
Do you have a question about the Toroid and is the answer not in the manual?
Questions and answers