Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for KMART Essential Garden
- Page 1 OFFSET UMBRELLA 10’ ROUND 08771343-4 8-48681-03668-6...
-
Page 2: Table Of Contents
Thank you for your purchase Thank you for your purchase! We are pleased that you have chosen Kmart for your outdoor furniture purchase. We hope that you enjoy the unmatched quality, comfort, and style of your new patio set. Every piece is meticulously considered all the way down to the smallest details, exclusively for you, by our world class design team. -
Page 3: Safety Information
Safety Information Umbrella Set Up Ensure that all parts are assembled properly and fully tightened as per the instructions. When placing in the desired location, ensure that the umbrella stands on flat ground. Examine Your Umbrella Examine occasionally to ensure that there are no loose parts. If loose parts are found, they must be retightened fully before additional use. -
Page 4: Pre-Assembly
Pre-Assembly PLANNING ASSEMBLY To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly. It takes about 30 minutes for two person to complete all the assembly. CAUTION: It is normal for the offset umbrella to sway from side to side, back and forth. -
Page 5: Package Contents
Pre-Assembly (continued) Package Contents PART QUANTITY DESCRIPTION Lower Bracket Upper Bracket Base Tube Knob Tube Rim Metal Sheet Sunshade Corner Connector Side Panel L Side Panel M Sand Bag Upper Base Cover Rotating Cover... -
Page 6: Assembly Instruction
Assembly Instruction Plac the upper bracket onto the lower bracket PLACE THE UPPER BRACKET “B” ONTO THE LOWER BRACKET “A” AS SHOWN. - Page 7 Assembly Instruction (continued) Attaching the base tube on the brackets LINE UP THE BOLT HOLES ONTO THE BASE TUBE “C” WITH THE CORRESPONDING BOLT HOLES ON THE TWO ASSEMBLED BRACKETS. SCREW THE BOLT “AA” ON WITH FLAT WASHER “BB” BY USING THE ALLEN WRENCH “CC” AND ENSURE THAT THE SCREWS ARE TIGHTENED.
- Page 8 Assembly Instruction (continued) Attaching the base tube onto the backrests side panels co ner connectors INSERT THE CORNER CONNECTORS “H” INTO THE FOUR ENDS OF THE ASSEMBLED BRACKETS. SLIDE THE SIDE PANEL “J” DOWNW RD BETWEEN THE CORNER CONNECTORS “H”.
- Page 9 Assembly Instruction (continued) Sliding the side panel downwards between the corner connectors SLIDE THE SIDE PANEL “I” DOWNWARDS BETWEEN THE CORNER CONNECTORS “H”.
- Page 10 Assembly Instruction (continued) Preparing the sand in the umbrella base PLACE THE SAND BAG “K” INTO THE UMBRELLA BASE AS THE PICTURE SHOWS. FOR STABILITY THE RECOMMENDED MINIMUM WEIGHT OF SAND TO BE PLACE INTO EACH SAND BAG IS 88 LBS FOR A TOTAL OF 176 LBS. AFTER FILLING WITH SAND ONLY, CLOSE THE POUCH BY ENSURING THE VELCRO IS SEALED.
- Page 11 Assembly Instruction (continued) Attaching the upper base-1 and 2 cover with the base side panels CHECK THE LOCKER FIRST TO MAKE SURE IT IS AT THE RIGHT POSITION AS THE PICTURE SHOWS. ASSEMBLE THE UPPER BASE COVER “L” WITH THE BASE SIDE PANELS “I” AS THE PICTURE SHOWS.
- Page 12 Assembly Instruction (continued) Attaching the metal sheet and the tube rim to the base tube AFFIX THE METAL SHEET “F” TO THE BASE TUBE ”C“ AND ROTATE BY USING KNOB ”D“ PUT TUBE RIM “E“ ONTO THE BASE TUBE ”C“...
- Page 13 Assembly Instruction (continued) Inserting the Sunshade into the base tube PUT THE STRAIGHT UMBRELLA POLE INTO THE UMBRELLA HANDLE AS THE PICTURE SHOWS. ASSEMBLE THE CURVED UMBRELLA POLE TOGETHER WITH THE STRAIGHT UMBRELLA POLE. TURN SCREW CAP CLOCKWISE TO TIGHTEN. INSERT THE WHOLE SUNSHADE INTO THE BASE TUBE “C”...
- Page 14 Assembly Instruction (continued) Before opening the umbrella SHAKE THE UMBRELLA FABRIC BEFORE OPENING THE UMBRELLA. ROTATE THE KNOB IN A COUNTERCLOCKWISE DIRECTION TO MOVE THE UMBRELLA CRANK HANDLE UPWARD. TIGHTEN THE KNOB ON THE HANDLE CLOCKWISE TO LOCK THE HANDLE IN PLACE. ROTATE THE CRANK CLOCKWISE TO OPEN THE UMBRELLA.
- Page 15 Assembly Instruction (continued) Moving the umbrella crank upwards ROTATE THE KNOB COUNTERCLOCKWISE DIRECTION AND MOVE THE UMBRELLA CRANK HANDLE TO ADJUST TO NEEDING GRADIENT, THEN TIGHTEN THE KNOB CLOCKWISE TO FIX THE UMBRELLA.
- Page 16 Assembly Instruction Use 360 degrees to adjust the umbrella at desired positions TURN THE KNOB COUNTERCLOCKWISE FOR A 360 DEGREE ROTATION. HOLD THE POLE OF THE UMBRELLA WITH ONE HAND WHILE ADJUSTING THE HANDRAIL WITH THE OTHER HAND. FIXATE THE UMBRELLA AT A DESIRED POSITION AND LOCK BY TIGHTENING THE KNOB CLOCKWISE.
-
Page 17: Customer Service
Customer Service YOTRIO CORPORATION 1100 Coiner Ct., City of Industry, CA 91748 1-626-269-6399 1-866-905-4107 SEVICE HOURS: MONDAY-FRIDAY 8:30 AM TO 5:00 PM PST / 11:30 AM TO 8:00PM EST E-MAIL: customerservice@yotrious.com... - Page 18 Email: customerservice@yotrious.com or Call toll-free: 1-866-905-4107 Made in CHINA / Hecho en CHINA...