Advertisement
Put the camera on top of the monitor, or on a table or desk...
* = Sticky tape
(Ensure that the supporting
surface is free of grease and dirt.)
1.
Remove backing from
one side of the adhesive
tape, and fix under the
disc.
2.
Place perch on top of
monitor, remove backing
from other side of the
adhesive tape, and push
disc with adhesive tape
down through central
perch hole.
screen !
The camera base can be removed by turning
it through 90 degrees (1) and pulling it down
out of the camera (2).
* The camera features a 1/4" UNC screw
thread for tripod mounting.
Advertisement
