Installation - Upvel UP-208FE Quick Installation Manual

Installation

•
Please install the switch in a cool and dry place;
•
Make sure that there is proper heat dissipation from the
switch and adequate ventilation around the switch;
•
The power input should be 110-240V, and the outlet
should be not too far away for the power cable to reach
(the length of the power cable supplied is 150 cm).
Desktop installation:
•
The surface must support at least 5kg;
•
Stick the rubber footpads supplied to the bottom of the
switch.
Rack installation
•
Use the the screws and L-planks supplied.
UR-208FE UPVEL PoE+ switch
5