Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Liyu Manuals
  4. Printer
  5. Lyric XFULL Series
  6. Manual

Liyu Lyric XFULL Series Manual

Hide thumbs

Advertisement

Quick Links

MANUAL
XFULL
SERIES

Advertisement

loading

Related Manuals for Liyu Lyric XFULL Series

Summary of Contents for Liyu Lyric XFULL Series

  • Page 1 MANUAL XFULL SERIES...

  • Page 2: Table Of Contents

    Dear customers: Please read this manual throughly before using Lyric XFULL series ink-jet printers. Catalog 1. Safety Instructions……………………………………… page 3 2. Installation and Troubleshooting..………………………. page 5 3. Appearance and Components…………………………… page 13 4. Operation Instructions……………………………………page 16 5. Technical Specifications………………………………….page 26 6.

  • Page 3: Safety Instructions

    Chap 1 Safety instructions Please read the following directions thoroughly before you start to use this machine: 1. You should place the printer in a room what is, ◆ clean and breezy with flat ground; ◆ anti-electromagnetic, quakeproof and without heavy dirty; keep the ambient conditions always be at temperature: 20~25 ℃...
  • Page 4 prohibited! 6. If you encounter the following troubles, please cut off the power at once and contact with the local dealer, 7. If you encounter the following troubles, please cut off the power at once and contact with the local dealer, ◆...

  • Page 5: Installation And Troubleshooting

    Chap 2 Installation and Troubleshooting 1. Packing box (1.1) one host machine; (1.2) one set of machine stand as follows, Items QTY. Left and right column Per 1 Crossbeam Roller for feeding Roller for take up Left and right holder for paper roller Per 1 Stand pillar Sub power switch...
  • Page 6 Items QTY. Power cable Print cable Cleaner cloth and nylon tube 1bag& 2 Main and sub tank per 1 User manual Inner hexagon spanner (S=2) Inner hexagon spanner (S=3) Inner hexagon spanner (S=5) Inner hexagon spanner (S=6) “O”ring RIP software PCI card 2.
  • Page 7 (2.1) Stand installation, Referring to the above figure, install the stand in following steps, ① Draw out the plug and wire from the crossbeam first, through the right column then take them out from the side hole in it, now you can connect the crossbeam with left/right column by fixed peg kits;...
  • Page 8 First is the ‘Found New Hardware Wizard’, please put the accessory cd into the cd-rom and click ‘next’; select ‘Don’t search. I will choose the driver to install’, click ‘next’;...
  • Page 9 Click “Have Disk”, to show “Install From Disk” interface, Click “Browse” to Select LiYuPciDriver.inf document under driver directory in CD, click ‘OK’,...
  • Page 10 select ‘LYRIC JetPlot Card’, then click ‘next’, the windows will start the installation automatically. After that, restart the computer, then the Installation is complete. (2.2) Electric installation ① Connect the 3-pin plug-in of the media motor and the 3-pin socket on the sub power switch.
  • Page 11 beside power switch and adjust the heat temperature by the temperature tuner. ④ Connect the plug-in of the vacuum cleaner into the power socket on the left side of the printer. Connect the power socket of the printer with the power supply socket by the accessory power cable.
  • Page 12 the functions and be ready to work.

  • Page 13: Appearance And Components

    Chap 3 Appearance and Components Please referring to the following figures carefully, Fig. 3.1 outside view Fig. 3.2 left view Fig. 3.3 right view Fig. 3.4 right front view Fig. 3.5 pulling system 1. guide cover: cover and protect carriage...
  • Page 14 2. pinch roller: work together with metal roller to push the media and make it move smoothly 3. head carriage: 8 Xaar piezo print heads inside 4. control panel: setting functions and printing mode 5. pinch roller handle: control the pinch roller to load the media 6.
  • Page 15 13. auto. feeding and take-up system: when media roll is adapted, media sensor will control the feeding operation; when printing long images, auto. take-up as long as printing 14. pulling system: automatic split up the roll media to cooperate with media feeding system to make the more smoothly and accurate media transmission.

  • Page 16: Operation Instructions

    Chap 4 Operation Instructions 1. control panel Fig 4.1 control panel 2. Keyboard description (2.1) PURGE: the carriage will move to the left side and waiting for purging after this button is pressed, then you can use four powerful purging button to purge the print head.
  • Page 17 (2.9) : select the menu and move manually as you need; also you can set the value by left and right keys. 5.2 LiYuPrint Operation Guide Double-click the icon of LiYuPrint on the desktop to launch the program, main interface as follows: 5.2.1 Setup Print Please choose the right number of printhead that your printer has before printing by LiYuPrint software.
  • Page 18 5.2.2 Glossary of Print Control Interface  Pass: Setup number of demand print pass.  Speed: Select print speed. LiYu POP series printer offers seven levels of speeds. The bigger number you select, the more quickly of the printing.  Step Calibration: Fill in number of step adjustment.
  • Page 19 appropriately.  Purge Frequency: When purging automatically, after the carriage entering the left cover of the printer, purging area, the printer will start vacuum cleaner automatically that was joined on the printer. The carriage proceeds to purge several times back and forth above the inhalant.
  • Page 20 by clicking it.  Depth Purge: There are four keys with different colors, when you press one of them, the carriage will move to purging area, purging the printheads with corresponding color (2~3printheads/color). At the same time, you can also click other keys to purge other printheads. Click “Back”, to keep the carriage back after that.
  • Page 21 If any one of them is not set properly, test lines will show it. All these calibration data is saved in Liyu.dat. You can backup it for safety. 5.4 Print images Click file → open or icon on the toolbar, then choose a *.prt or *.prn...
  • Page 22 During printing, a broken line across the image preview area shows process of the printing, the part up the broken line is printed already, the below is the part ready to print. 5.5 PhotoPRINT Setup PhotoPRINT is sent along with the printer which is the professional RIP software.
  • Page 23 ① Insert LiYuPrint CD sent along with the printer into your CD-ROM, copy ‘Iccprofile’, ‘OutputDriver’ and ‘Density’ three folders in the root directory of LiYuPrint CD to the folder in which PhotoPRINT installed, replace the folders existed. For example, your PhotoPRINT is installed in the folder C:\Program files\PhotoPRINT, then you should copy ‘Iccprofile’, ‘OutputDriver’...
  • Page 24 PASS in the list on the right of the label ‘Output’. For example, if your printer type is PM 3212, ink brand is SaiWei, and PASS number is 4, please select PG3212–PVC–SaiWeiInk-4PASS.icc in Output list. In the same way select .trc file with same filename in Linearization list of ‘Default Properties’...
  • Page 25 Fig 4.10 Operation: the temperature changes one degree on each press of the temperature setting button. Please press this button repeatedly until get the temperature you want. The column tuner on the down-left is to adjust the movement range of the temperature, the default range is ±1℃. Note: Please pay attention to the connection column on the left side of the plate when disassembling the back plate.

  • Page 26: Technical Specifications

    Chap 5 Technical Specifications Model XF1808/1812 XF2508/2512 XF3208/3212 Printhead 8/12 XJ-128/200dpi Print resolution 180X185dpi/180X370dpi Printhead clearence 3mm ~ 5mm off media Image size 1.83m/6.00ft. 2.50m/8.20ft. 3.20m/10.49ft. Media size 1.88m/6.16ft. 2.55m/8.36ft. 3.25m/10.66t. Printing speed PG1808/2508/3208:(36,24,18) m²/h (2p, 3p, 4p) PG1812/2512/3212:(50,33,25) m²/h (2p, 3p, 4p) Print mode Uni/bi-direction Ink type...
  • Page 27 Chap 6 Maintenance Items 1. Purging (see as Fig.6) (1.1) During printing, if nozzle clogged happen, you should purge the head by pressing “PURGE” key, and the carriage will move to the purge zero at the left end of the machine. (1.2) Press the four color button to purge the head, you can prolong the pumping time if head heavy clogged.

  • Page 28: Maintenance

    the valves (about 3~5 circles anti-clockwise) to return ink supplying. (1.7) Repeat step (1.2), (1.3) and clean up the remained flushing solution in head till the solvent ink jet out, now return printing. (1.8) If head very terrible clogged, you must stop printing and power off. Take down the head along with bracket and soak the nozzle plate into the flush solution for several hours then re-install it.

  • Page 29: Warranty Items

    Chap 7 Guarantee Items 1. As for PH series inkjet printer purchased from our authorized dealer, we guarantee one year from the purchasing date verified by Guarantee Card. 2. In one year guarantee, the dealer will provide free of charge service for the troubles happened under normal using state.
  • Page 30 (2.1) one 1000W dry and wet cleaner; (2.2) two 50ml glass syringe; (2.3) several cleaner cloth with good quality; (2.3) In the workroom, you’d better install one big-power exhaust fan, and one psychro-meter, one humidifier also necessary in dry area.

This manual is also suitable for:

Lyric xf1812Lyric xf1808Lyric xf2512Lyric xf3208Lyric xf3212Lyric xf2508